Steel
Steel - SRS #4537
DESCRIPTION: Ingersoll Rand; Tools/Options: 500' of 4.5" X 20' Ingersoll Rand Drill Rod with 3.5" Connections. T4 Hex/Squares. Calipers a full 4.5" but some Pitted from Sitting.
Steel - SRS #4535
DESCRIPTION: Ingersoll Rand; Condition: Good; Tools/Options: Ingersoll Rand: Near New Ingersoll Rand 4.5" OD X 30' Drill Rod with 2-7/8" Threads. Approx. 1,020' (34 joints) Available.
Steel - SRS #4521
DESCRIPTION: Tools/Options: Approx. 1,200' of Ingersoll Rand 3.5" X 20' with 2-3/8" Threads, Pin Down. Used Drill Rod
Steel - SRS #4492
DESCRIPTION: Condition: Never Used; Tools/Options: 19 Joints on New, Never Used 3.5" O.D. X 20' Drill Pipe with 2-3/8" Threads. Also Available 40' X 6" Used Drill Collars and Subs for the Drill Pipe
Steel - SRS #4490
DESCRIPTION: Drill Rod; Condition: Never Used; Tools/Options: 1,300' of 5" X 20' Drill Rod with 3.5" IF Threads, 4X4 Flats on Box End. Pipe is approx. 5-6 years old but has never been used. Was going to be used on a TH-60.
Steel - SRS #4424
DESCRIPTION: Ingersoll Rand; Tools/Options: Ingersoll Rand: 725' of IR Drill Rod, 3-1/2" Regular run Pin Up. 25' Lengths. Another 500' +/- Available. Measures 1/8" Smaller than New.
Steel - SRS #4324
DESCRIPTION: Schramm; Tools/Options: (6) Joints of Schramm Aluminum Drill Rod. 4.5" OD X 20' Lengths with 3.5" Regular Threads, Runs Pin Down.
Steel - SRS #4310
DESCRIPTION: Drill Steel; Tools/Options: 4.5" OD X 20' Drill Rod with 3.5" IF Threads, Wrench Flats on both Ends, Flush Joint. Approx. 1,000'.
Steel - SRS #4219
DESCRIPTION: Driltech; Tools/Options: 38 Joints of 3.5" X 20’ Driltech Drill Rod. 2-3/8" IF Pin Up. All around 40-50%. Threads are Very Good, Outside is Worn Down Some.
Steel - SRS #4133
DESCRIPTION: Drill Pipe; Tools/Options: Approx. 1,360' of 4.5" O.D. X 20' Bottleneck Drill Pipe with 2-7/8" Flats. Bought New in 2012. Tandem Axle Volvo Pipe Truck also Available for an Extra Cost
Steel - SRS #4131
DESCRIPTION: Drill Pipe; Tools/Options: 780' (39) Joints of 3-1/2" O.D. X 20' Drill Pipe with 2-3/8" IF Threads. Good Condition, Little Use, Flats on Box End.
Steel - SRS #3994
DESCRIPTION: Chicago Pneumatic; Tools/Options: Approx.. 2,500' of CP Style 4-1/2" Drill Rod with 3.5" API Threads. Very good Condition, about 90%.
Steel - SRS #3975
DESCRIPTION: Ingersoll Rand; Model: Drill Steel; Tools/Options: 19 to 20 Joints of 4.5" X 20' good used pipe with 2-7/8" IF threads and T3 flats on box end. It has been miked. 14 joints of T3 rod, 4-1/2" O.D. X 20' with 3-1/2" reg threads. Good threads, pipe is about 65%.
Steel - SRS #3942
DESCRIPTION: Tools/Options: 1,400' of 2-7/8" O.D. X 15' Long FEDP Drill Pipe, Wrench Flats on Box Ends.
|
Southern Office: 1485 DeSoto Blvd N Naples FL 34120 Phone: 239.774.1939 |
Northern Office: Oil City PA 16301 Phone Toll FREE: 1.888.204.3907 |