Steel
Steel - SRS #4492
DESCRIPTION: Condition: Never Used; Tools/Options: 19 Joints on New, Never Used 3.5" O.D. X 20' Drill Pipe with 2-3/8" Threads. Also Available 40' X 6" Used Drill Collars and Subs for the Drill Pipe
Steel - SRS #4490
DESCRIPTION: Drill Rod; Condition: Never Used; Tools/Options: 1,300' of 5" X 20' Drill Rod with 3.5" IF Threads, 4X4 Flats on Box End. Pipe is approx. 5-6 years old but has never been used. Was going to be used on a TH-60.
Steel - SRS #4424
DESCRIPTION: Ingersoll Rand; Tools/Options: Ingersoll Rand: 725' of IR Drill Rod, 3-1/2" Regular run Pin Up. 25' Lengths. Another 500' +/- Available. Measures 1/8" Smaller than New.
Steel - SRS #4415
DESCRIPTION: Drill Steel; Condition: SOLD; Tools/Options: 285' of 15' Drill Rod with 2-3/8" IF Connections. SOLD
Steel - SRS #4324
DESCRIPTION: Schramm; Tools/Options: (6) Joints of Schramm Aluminum Drill Rod. 4.5" OD X 20' Lengths with 3.5" Regular Threads, Runs Pin Down.
Steel - SRS #4310
DESCRIPTION: Drill Steel; Tools/Options: 4.5" OD X 20' Drill Rod with 3.5" IF Threads, Wrench Flats on both Ends, Flush Joint. Approx. 1,000'.
Steel - SRS #4219
DESCRIPTION: Driltech; Tools/Options: 38 Joints of 3.5" X 20’ Driltech Drill Rod. 2-3/8" IF Pin Up. All around 40-50%. Threads are Very Good, Outside is Worn Down Some.
Steel - SRS #4133
DESCRIPTION: Drill Pipe; Tools/Options: Approx. 1,360' of 4.5" O.D. X 20' Bottleneck Drill Pipe with 2-7/8" Flats. Bought New in 2012. Tandem Axle Volvo Pipe Truck also Available for an Extra Cost
Steel - SRS #4131
DESCRIPTION: Drill Pipe; Tools/Options: 780' (39) Joints of 3-1/2" O.D. X 20' Drill Pipe with 2-3/8" IF Threads. Good Condition, Little Use, Flats on Box End.
Steel - SRS #4094
DESCRIPTION: Tools/Options: 1,460' of 3.5" Drill Rod, Collars, Pipe Truck. OFF MARKET
Steel - SRS #4075
DESCRIPTION: Steel; Condition: Good; Tools/Options: (40) Joints, 800' of 4-1/2" O.D. X 20' Drill Pipe with 3.5" Pin & Box, Wrench Flats. Used on One Job.
Steel - SRS #3994
DESCRIPTION: Chicago Pneumatic; Tools/Options: Approx.. 2,500' of CP Style 4-1/2" Drill Rod with 3.5" API Threads. Very good Condition, about 90%.
Steel - SRS #3975
DESCRIPTION: Ingersoll Rand; Model: Drill Steel; Tools/Options: 19 to 20 Joints of 4.5" X 20' good used pipe with 2-7/8" IF threads and T3 flats on box end. It has been miked. 14 joints of T3 rod, 4-1/2" O.D. X 20' with 3-1/2" reg threads. Good threads, pipe is about 65%.
Steel - SRS #3942
DESCRIPTION: Tools/Options: 1,400' of 2-7/8" O.D. X 15' Long FEDP Drill Pipe, Wrench Flats on Box Ends.
Steel - SRS #3941
DESCRIPTION: RC Pipe; Tools/Options: 1,600' of 7.5" O.D. X 31'6" (avg. length) X 6" I.D. RC Drill Pipe. Includes Slips, Elevators, Crossover Subs, 35' Kelly and Counter Weights.
Steel - SRS #2181
DESCRIPTION: RC Pipe; Tools/Options: RC Pipe. Does not have inner tubes, can be used as drill steel. 400' of 4.5" X 20'..Condition: Avg.
Steel - SRS #3265
DESCRIPTION: IR ; Tools/Options: Approx. 500' of 4.5" X 20' X 2-7/8" IF IR Drill Rod (used). Color Video Camera only used a Few Times.
Steel - SRS #3816
DESCRIPTION: Drilltech; Condition: Used; Tools/Options: Approx.. 300'(15 Joints) of 4.5" X 20" Drilltech Drill Pipe.. Condition: Used
Steel - SRS #3771
DESCRIPTION: Condition: Good; Tools/Options: 5" X 42' Drill Pipe. Approx. 70,000' available. Good Condition
Steel - SRS #3728
DESCRIPTION: Condition: Good/Used; Tools/Options: (13 Pieces) 2-7/8" X 20' Drill Rod with 2-3/8" IF Threads.
Steel - SRS #3671
DESCRIPTION: Condition: Great; Tools/Options: Approx. 840' of 2-7/8" IF X20' Drill Pipe. O.D. Shows it to be just under 4-1/4". Has Lugs, No Wrench Flats. Real Good Condition. More available but not as good of condition.
Steel - SRS #3658
DESCRIPTION: Condition: Good; Tools/Options: 285' of 2-7/8" X 15' Drill Rod with 2-3/8" IF Thread. 105' Basically New and 180' in Good Condition.
Steel - SRS #3563
DESCRIPTION: Drill Steel; Tools/Options: 600' of 4-1/2" X 20' Drill Rod with 3.5" Pins, Wrench Flats. Current owner never used it.
Steel - SRS #3511
DESCRIPTION: Drill Rod; Tools/Options: 450 Joints of 4.5" X 30' X 2-7/8" IF Range II Drill Rod.
Steel - SRS #3510
DESCRIPTION: Drill Rod; Tools/Options: 3,000' 4.5" X 30' X 2-7/8" IF Range II Aluminum Drill Rod. Like New.
Steel - SRS #3442
DESCRIPTION: Tools/Options: 350' of 4.5" X 2-7/8" Drill Pipe, 140' of 20' Joints and 210' of 15' Joints. Approx. 30 Bits (6" - 16"), 5 Downhole Hammers & Numerous Subs.
Steel - SRS #3383
DESCRIPTION: Tools/Options: Range II Drill Pipe. 3.5" O.D, 5" Tool Joints, 30' - 32' Long. Internal Flush Joint. High Tensile Steel, Strong & Straight. Approx. 2500'.
Steel - SRS #3274
DESCRIPTION: Chicago Pneumatic; Tools/Options: Chicago Pneumatic Drill Steel: (76 Joints) 2,280' 4.5" X 30' X 3.5" Regular Thread CP Drill Rod with Flats.
Steel - SRS #3144
DESCRIPTION: Tools/Options: 23 Joints, 460' of 4-1/2" X 20' S-S W 4-1/2" XH Box -Pin.
Steel - SRS #3054
DESCRIPTION: Steel; Condition: Used Once; Tools/Options: 500' of 4-1/2" X 20' Full Hole API Regular Drill Rod. Used Only One Time..
Steel - SRS #2973
DESCRIPTION: Tools/Options: 2,100' (105 Joints) of 2-7/8" Bottleneck X 20' Drill Rod with 2-3/8" IF Connections. Hand Banded. Brand New Never saw Dirt!
Steel - SRS #2544
DESCRIPTION: Tools/Options: 65 Joints (1300') of 3-1/2" X 20' X 2-7/8" Thread Bottleneck Drill Pipe. Approx. 50% Life Remaining, Some Joints Need New Pins. Approx. 200' - 300' is Good, Pins need Rethreaded on the Rest.
Steel - SRS #2302
DESCRIPTION: Drill Steel; Tools/Options: 3700' 4-1/2" X 30' Drill Rod. 3-1/2" API Reg Tool Joints. Condition:
Steel - SRS #2149
DESCRIPTION: HQ Drill Stem & Core Bbl.; Condition: Near New - Some New; Tools/Options: HQ Drill Stem & Core Bbl Year: ; Compressor: ; Mud Pump: ; Mounted On: ; TrEngine: , ; Tools/Other Options: 120' - 130' of HQ Drill Stem, Complete 10' Core Barrels for Wire-Line. Inner & outer bbl. Inner Bbl. Used/Like new - only cored 160'. New Outer Bbl. Also has a New Series 8 Bit and a New Reaming Shell.
Steel - SRS #2133
DESCRIPTION: Tools/Options: 400' (20 Joints) of 4-1/2" X 20' RC Pipe
Steel - SRS #1636
DESCRIPTION: steel; Tools/Options: ATLAS COPCO DRILL PIPE - VARIOUS LENGTHS & DIAMETERS. 78 PIECES +/- 2000' . CALL FOR DETAILS
|
Southern Office: 1485 DeSoto Blvd N Naples FL 34120 Phone: 239.774.1939 |
Northern Office: Oil City PA 16301 Phone Toll FREE: 1.888.204.3907 |