SRS #3990

Tools/Options: GEFCO 30K SOLD Year: 2012: Rig is set up to Handle 3-1/2" X 20' Flush Joint Drill Pipe with 2-3/8" IF Tool Joint. 25,000# Pulldown and 30,000# Pullback, 35' Mast with 29' Head Travel, 18 GPM Bean Water Injection, 7-Gallon Electric Downhole Lubricator. 25,000# Single Line Hydraulic Main Winch over the Jib, Hydraulic Rod Spinner, Modified 60" Breakout Wrench Pulled by Hydraulic Cylinder. Tophead Rated at 1-120 rpm with Infinite Speed Control and 70,000 in-lbs. Torque. 24 Piece Rod Storage Rack with Slide Mounted on Driller's Side, 6-Piece Carousel, Pipe not Included. Two 100-Gallon Fuel Tanks. 22,000# Front Axle, 46,000# Rear Tandem, 18-Speed Fuller Transmission. 425/65R22.5 Front Tires, 11R22.5 Rear Tires. Odometer Reads 19,124 Miles and 8,549 Hours, Hub Meter Reads 17,260, approx. 3,528 Compressor Hours (need to confirm hour meter accuracy). Recent Work: New Front Brakes & New Air Dryer in 2021, New Sheaves, New Fuel Pump, New Turbo Solenoid, New Bearing in Gearbox and Four New Tires in 2020, Rebuilt Tophead, New Radiator Fan, New Cables, New Winch Brake, Rebuilt Compressor Driveshaft and New Cable on Top of Mast in 2019. 2022 Resealed Main Feed Cylinder, Added Gussets to Lower Cylinder Mount, Resealed Left Mast Raising Cylinder, Removed and Cleaned all Pins for Mast Raising Cylinder, Replaced Rod Centering Slip Inserts, Table Pins and Brackets, Jib Swing Cylinder Mounting Bracket, all Top Valve Bank Handle Boots & Push Buttons on Control Panel and Helper's Side Push Bottons, Compressor Discharge Temp Gauge, Receiver Tank Pressure Gauge and Changed Hydraulic Oil. No Tooling Available. SOLD