Rotary G
Rotary G - SRS #4578
DESCRIPTION: 1975, Gardner Denver; Model: 1400; Compressor: GD 667; Mud Pump: 5X6 Belt Driven; Engine: PTO; Mounted On: 2001 Paystar; Truck Engine Make: Cummins; Tools/Options: Gardner Denver 1400 Year: 1975: Retractable Table, 16" Opening, (4) Jacks, Square Tube Derrick, 1400 Air Clutch Drawworks.
Rotary G - SRS #4560
DESCRIPTION: 2015, GEFCO; Model: 30K; Compressor: Sullair 1000/350; Mud Pump: 4X3 Centrifugal; Engine: PTO; Mounted On: 2015 Peterbilt 367 6X4; Truck Engine Make: Cummins ISX15; Condition: Good, Working Drill; Tools/Options: GEFCO 30K Year: 2015: 40,000# Tophead Drive Pullback Capacity, Main Hydraulic Winch with 20,000# Single Line Capacity, 40,000# on 2-Part Line, 6-Rod Carousel Set Up for 4.5" O.D. X 20' X 2-7/8" I.F. Drill Pipe, Single Rod Loader, FMC 18 GPM Water Injection Pump, 7 Gallon Capacity DHD Lubricator, 4 Hydraulic Outriggers, Pipe Spinner. Compressor Hour Meter Reads 2,650 Hours, Truck Odometer Reads 41,180 Miles. 400' of Drill Rod Included.. Condition: Working Drill
Rotary G - SRS #4517
DESCRIPTION: 2023, GEFCO; Model: 30K; Compressor: 1050/350; Mud Pump: 3" Wilden; Engine: PTO; Mounted On: 2023 Peterbilt; Truck Engine Make: Cummins 565 HP; Condition: Great; Tools/Options: GEFCO 30K Year: 2023: Holds 6 Rods in the Carousel and 15 in the Rod Box. Single Rod Loader, Rod Spinner, Hammer Holder, Foremost Shock Sub. Some Warranty Left out of the 5 Year Warranty. Rod that drill can hold is included along with a used 6" QL6 Hammer and an 8" Rebuilt Hammer with 8-3/4" Hammer Bit and a 8-3/4" Roller Bit with 15' Sub, 5-7/8" Roller Bit for Cleanout, Stabilizers, Bit Breakers, Slips, Pipe Lifters, 10-12 Bags of Mud. Also Includes a Water Truck (2) 20' Hoses, No Fuel Tank on the Truck but has a 120 Gallon Tank with an Electric Pump that could be Included. Rig is Set Up to Run 4.5" X 20' X 2-7/8" Drill Pipe. Hub Odometer Currently Reads 10,977 Miles, Total Rig Hours - 2,313 and Current Compressor Hours are 1,222.
Rotary G - SRS #4393
DESCRIPTION: 2018/19, GEFCO; Model: 40K; Compressor: Sullair 1000/350; Mud Pump: Plumbed; Engine: PTO; Mounted On: 2019 Peterbilt 367 6X4; Truck Engine Make: Cummins 565 HP (recently rebuilt); Condition: Good Working Drill; Tools/Options: GEFCO 40K Year: 2019: Newly Rebuilt Engine (Injectors, Turbo, Oil Cooler), Truck Brake Compressor also Rebuilt. Rig is set up to Run 4.5" X 20' Flush Joint Drill Pipe with 2-7/8" IF Tool Joints and a Holte 350 Casing Hammer. 25K Pulldown, 40K Pullback. 18 GPM Bean Water Injection, 7-Gallon Electric Downhole Lubricator, 25,000# Single Line Hydraulic Main Winch over the Jib. Hydraulic Rod Spinner, Modified 60" Breakout Wrench, Auxiliary Winch Mount & Hydraulics (rig has 2 winches, cable recently replaced), 3-Speed Tophead, 15 Piece Rod Box, 6-Rod Carousel, Hammer Holder. Upgraded Joysticks (5-Volt Electric Upgrade), Compressor has approx. 2,300 Hours, approx. 6,000 Total Frame Hours, < 500 Hours on the Newly Rebuilt Engine.. Truck has 22,000# Front Axle, 46,000# Rears, 18-Speed Fuller Transmission. 400' of used pipe included.. Condition: Working Drill
Rotary G - SRS #4555
DESCRIPTION: 1978, Gardner Denver ; Model: 1500; Compressor: 667 2-Stage; Mud Pump: 5-1/2" X 8" FLUID END AND POWER END (2026) RECENTLY REBUILT; Mounted On: 1978 Ford L9000; Truck Engine Make: CAT 3208; Tools/Options: Gardner Denver 1500 Year: 1978: 10" Sliding Rotary Table, Manual Clutches, Triple Line Kelly and Sandline, 24; Kelly, Kelly Clutch Overhauled. Rig is set up to run 3.5" X 15' Pipe and has a 15' Rod Box, 4 Leveling Jacks (one just recently repacked 2026). Master Cylinder on Driller side has been Repacked. Power End (2026) and Fluid End recently rebuilt, Pinion Bearings in Rotary Table Replaced (2026), Truck has a 13-Speed Transmission and Engine has a New Water Pump and Belts. Will Include 735'' of 3.5" Drill Pipe, 6", 8" and 10" Stabilizers. Recently Painted.
Rotary G - SRS #3914
DESCRIPTION: 1975, Gardner Denver; Model: 2000; Mud Pump: GD 7-1/2" X 10"; Engine: PTO; Mounted On: 4-Axle Crane Carrier; Truck Engine Make: 400 Cummins; Tools/Options: Gardner Denver 2000 Year: 1975: 58' Mast, 10" Retractable Rotary Table, Air Clutches, Two Drum Machine, No Sandline, No Rod Rack, 4-1/4" or 4-1/2" X 38' Hex Kelly (needs confirmed), Rig is set up to run 30' Rod. Has a Large Gardner Denver Swivel that has been Rebuilt, 2 Wells since. Has a Winch on the Side for Oil Field Dogs. Also Includes 810' of 5" X 30' Drill Rod with 3-1/2" IF Threads (used on 6 wells) and a Rod Trailer that was Purchased New and has < 300 Miles on it. Can be sold without rod.
Rotary G - SRS #1967
DESCRIPTION: Gardner Denver; Model: 3000; Mud Pump: 7-1/2 X 10 GD; Engine: (2) Detroit 6V71 Rebuilt in 2019; Mounted On: 6 Axle CCC; Truck Engine Make: 871T; Condition: Excellent; Tools/Options: Gardner Denver 3000 : Operating Daily! Re-manufactured in 2006. Double Drum with Sandline - 3 Drum line (no need for rathole), Kelly Track in the Derrick. Fast Drilling, Easy Removeable Table. 60' Racking Board. 1 deck engine drives the mud pump and the other engine drives the Drawworks. 70' mast, telescopes to 97', rated @ 250,000# with 100 ton Webb traveling block with 1" cables. 4" King swivel with 4-1/2" IF X 37' fluted Kelly. 18" Brewster Skytop oilfield table. (2) BJ breakout tongs, air clutches, (6) hydraulic jacks (4) screw jacks, 50 ton McKissick block (Kelly), operators platform. 4-5 yrs. old since completely rebuilt from ground up. Includes all the standards - elevators, slips, bushings. Has set 36" Casing, Table Lifts Out with Sling. Deck Engines Rebuilt in 2019. All 4 Rear Axles Pull.
Rotary G - SRS #4132
DESCRIPTION: Gardner Denver; Model: 1500; Mud Pump: 5X10; Mounted On: 1976 +/- 4-Axle CCC; Truck Engine Make: Cummins; Condition: Being Reconditioned; Tools/Options: Gardner Denver 1500: Big Kelly (4-1/2" - 5" to be confirmed), Mast is at Least 38', Rig can Handle 34' Pipe Retractable 10" Table, Leveling Jacks, Air Clutches on Drawworks, Sand Reel and Air Clutches.
Rotary G - SRS #4454
DESCRIPTION: Gardner Denver; Model: 1000 HD; Mud Pump: 5X6 Piston; Mounted On: 2004 IHC 7400; Truck Engine Make: International DT 530; Tools/Options: Gardner Denver 1000 HD: 4-Part Kelly Line, 3-Part Trip Line, 3-3/4" Fluted Kelly approx. 5 Years Old. Recently Installed 7-1/2" Retractable Table Rebuilt when Installed. Mud Pump Installed in approx. 2023, had a Complete Rebuild at that time. Mud Side Rebuilt once Since. Manual clutches on Drawworks and Mud Pump. Double Frame Truck, Complete Rebuild on Engine < 50 Hours ago. Brand New Clutch, and Tires < 2000 Miles Since. Eaton fuller Transmission. Walking Beam and Rear Brakes have < 1,000 Miles. Includes 380' - 400' of 3.5" Drill Rod with 2-3/8" IF Thread, No Subs..
Rotary G - SRS #4443
DESCRIPTION: 1990, Gill Beetle; Mounted On: Tracks; Tools/Options: Gill Beetle Year: 1990: Tophead Drive. Includes 200' of Aluminum Drill Rod and 100' of Steel Drill Rod. Carousel holds 6 Rods. IR Side Air Available for an extra cost.
Rotary G - SRS #4442
DESCRIPTION: Geo Drill; Compressor: 900/350 Sullair; Mounted On: 2005 Sterling; Tools/Options: Geo Drill: 15-Rod Carousel. Includes 300' of 20' 3.5" Regular Drill Rod.
Rotary G - SRS #4434
DESCRIPTION: 2014, Geoprobe; Model: 7822DT; Engine: PTO; Mounted On: Tracks; Truck Engine Make: 4-Cylinder Diesel; Condition: Ready to Work; Tools/Options: Geoprobe 7822DT Year: 2014: Auto Hammer, Breakout Table, Rod Clamp, Breakout Wrench, Two Winches. Rotary, Auger, Core and SPT Sampling Capabilities. Low Hours, approx 6,680. No Tooling Included.
Rotary G - SRS #4124
DESCRIPTION: Tools/Options: Land Rig: 700 Drawworks similar to a GD 500, Single Drum Mechanical 700 HP 1-1/8" Drill Line, Foster Makeup and Breakout. Cat heads with (2) CAT C15, 540 HP Engines, C195-80 Torque Converters on an Inline Compound 350 Air Compressor, Eaton 424 Water Cooled Brake. 128T'X15'6"W 450,000# Single Hook Load Cantilever Mast with (5) 16" Sheaves (1) 20" Fast Line Sheave 4" Stand Pipe with Rotary Hose Racking Board Tong Line and Weights and Derrick Stand. 17' Floor Height Substructure, 450,000# Setback Sub 21' Wide X 50' Long Swingout Dog House Stands on 5' Wide X 5'T Pony Subs (pony subs can be removed to make a 12' floor height). (3) Ingersoll Rand Air Winches, (2) Electric/Hydraulic Wireline Machines. 20-1/2" RCZP Rotary Table, Artic 250 Ton Shorty Blocks, (5) 1-1/8" Sheaves with Elevator Links. 9' High X 10' Wide X 16' Long Doghouse Mounted on a 9' High X 10' Wide X 20' Long Skid. (2) 5' Wide X 42" X 30' Long Catwalks. Brake Cooling Skid with Brake Water Tank Heat Exchanger and Centrifugal Pumps. 48' Long Generator House with Switch Gear and (2) Generator Bays (no generators). (1) Maxum M1600 Triplex Mud Pump PBA CAT 3512B Engine, (1) Gold Horse 1300 Triplex Mud Pump PBA CAT 3512B Engine. 6' T X 10' Wide X 40' Long, 3 Compartment Mud Pit with Two Mud Agitators and 2 Shale Shakers, 6'T X 10' Wide X 40' Long 3 Compartment Mud Pit (3) Agitators, Mud Hopper and Centrifugal Pumps. 8' Wide X 30' Long Mud House with Stands. 500 bbl. Water Tank, 8' X 33' with 4 Compartment Lubester. 500 bbl. Water Tank 8' X 33' with Centrifugal Pumps. 8' X 34' Water Tank. 10,000 Gallon Diesel Tank with 2 Pumps and Filters. 5 Compartment Lubester. 13-5/8" Shaffer Double BOP, 5,000 psi with 13-4/8" Annular. 13-5/8" Shaffer Double BOP, 5,000 psi with 13-5/8" Annular & Drilling Spool. Scarbrough, 6 Station Closing Unit with Electric & Pneumatic Pumps, 10 Bottle with Stainless Control Lines. 5,000 psi Skid Mounted Choke Manifold, (7) Suite Cases, Artic T-200 Swivel, 4-1/4" X 39' Kelly with Shuck and Rat Hole, Martin Decker Weight Indicator Panel. Misc. Tooling, Manual, Tongs, Mud Bucket, Elevators, Elevator Links, Crossover Subs, Bit Breakers, Several Pieces of 10" Steel Flow Long. Was Drilling 8,000' Gas Wells During COVID then Parked.
Rotary G - SRS #3916
DESCRIPTION: 1980's, Gardner Denver; Model: 3000; Mud Pump: 7-1/4" X 14" Gardner Denver; Engine: CAT 3406B; Mounted On: 3-Axle Trailer; Tools/Options: Gardner Denver 3000 Year: 1980's: 1980's Drill, 18" Gardner Denver Rotary Table, 96' Free Standing Mast, Single Drum 8-Lines, Rat Hole Rig, 4-1/4" Square Kelly, Includes 130 Joints of X-Hole Drill Pipe, 8 Collars, Mud Boat, 3 Pipe Tubs.
|
Southern Office: 1485 DeSoto Blvd N Naples FL 34120 Phone: 239.774.1939 |
Northern Office: Oil City PA 16301 Phone Toll FREE: 1.888.204.3907 |