SRS #3854

Tools/Options: Gefco Stratastar 5 : Rig is Set Up for Mud Rotary Work but the Mud Pump is not Installed, Currently Using Skid Mounted Mud which is not for sale. No Auto Hammer but it has a Cathead. Diesel, Air Cooled Deck Engine. Flanged Pump Drive Adapter to Accommodate (2) Hydraulic Pumps to Power Rig Components & Functions. Two Rear and One Front 24" Stroke Hydraulic Leveling Jacks with 12" Swivel Base Pads. Hydraulically Actuated Slide Base allowing Unit to move 16" on-off Hole. Single Cylinder Hydraulic 8" Square Tubing Mast, and a Secondary Mast Extension that has 54" of Additional Travel. Overall operating Height is 9' with Secondary Feed Retracted (9'6" with Crown Block). Total Feed Travel Capability is 10'6". Mast Slides Hydraulically Towards Ground via Secondary Feed to allow Angle Drilling from Vertical to 30° off Vertical in Various Degree Increments. 16,000# Pullback and 12,000# Pulldown. 2,500# Auxiliary Winch, Hydraulically Driven Cathead Dual Spindle, 2-Speed Tophead with 72" of Feed Travel, 0-75 and 0-300 RPM Hydraulically Powered with 5,000 Ft.-Lbs. Torque and Infinite Speed Control. Tophead Slides 12" to Provide Alignment to Bore Hole with Low or High Speed Spindle. Easy Connection for Pushing Soil Samples or Rotary Drilling without changing Spindle Adapters. Low Speed Rotary has a 2-3/4" Open Spindle Option, High Speed has a NWJ Box Connection. Universal Coupling with 1-5/8" Female Hex Adapter. Crown Block Extension Extends Crown Sheaves 5' above Primary Mast to Facilitate Sample Driving & Tool Handling. Could use some Hydraulic Hoses and Valves. Hour Meter Reads, 2,759. 2022 Recently went through the Hydraulics and Fuel System, Installed a New Fuel Tank, Pump, Filter and Delivery Lines. A new Breakout Wrench is going to be Installed on it for Rotary Drilling.