Rigs
Rotary D - SRS #4088
DESCRIPTION: 2000, Driltech; Model: D25; Compressor: 1000/350; Engine: CAT 3406; Mounted On: 2000 Sterling; Truck Engine Make: CAT C12; Condition: Working Drill; Tools/Options: Drilltech D25 Year: 2000: OFF MARKET Clean Rig, has approx. 6,800 Total Hours on it. Includes approx. 900' of 3.5" Drill Pipe, some of which is new.
Sold - SRS #4082
DESCRIPTION: 2022, GEFCO; Model: 40K; Compressor: Sullair 1000/350; Mud Pump: 4X3X13 Centrifugal; Engine: PTO; Mounted On: 2022 6X4 Peterbilt; Truck Engine Make: Cummins 565 HP; Tires: 425/65R22.5 Front, 11R22.5 Rears; Condition: SOLD; Tools/Options: GEFCO 40K Year: 2022: SOLD Rig has approx. 200 Hours, 40,000# Pullback, and 25,000# Pulldown, Electric Air Regulation System, 25 GPM Bean Water Injection (UPGRADE), 7-Gallon Electric Downhole Oiler, 25,000# Single Line Hydraulic Main Winch over the Jib, Rig is set up to Handle 4.5" X 20' Flush Joint Drill Pipe with 2-7/8" IF Tool Joints. Hammer Holders, Hydraulic Rod Spinner, Modified 60" Petol Style Breakout Wrench (UPGRADE), PL2 Auxiliary Winch (UPGRADE), Air Control Louvers System on Compressor Cooler (UPGRADE), 3-Speed Tophead, 19 Piece Large Rod Box to hold 380' (UPGRADE) and 6-Rod Carousel. 22,000# Front Axle, 46,000# Rears, 18-Speed Fuller Transmission. Fully Loaded Rig. SOLD
Sold - SRS #4038
DESCRIPTION: 1973, Chicago Pneumatic; Model: T-670W with upgrades; Compressor: 825/350 GHH Upgraded & Rebuilt; Engine: 3406 CAT; Mounted On: 1987 Ford L8000; Truck Engine Make: 290 Cummins; Condition: SOLD; Tools/Options: Chicago Pneumatic T-670W Year: 1973: SOLD Rig has had the Bigger GHH Air Compressor (REBUILT) Installed on it. Rod Box, Tool Box, One Front and Two Rear Jacks, Brand New 140# Pulldown Chains and Some New Sprockets & Bushings, Brand New Floatation Tires on the Front. Rig was Fitted in the 1980's with a 3406 CAT Deck Engine & Funk Box. Has some Hydraulic Leaks. Truck has an 18-Speed Eaton Transmission. No Pipe Available. They were Running 4" X 20' Drill Pipe but the Carousel is Capable of 4.5" Drill Pipe. SOLD
Sold - SRS #3291
DESCRIPTION: Bucyrus Erie; Model: 28L; Compressor: None; Mud Pump: None; Engine: IHC Gas; Mounted On: Skids; Condition: SOLD; Tools/Options: Bucyrus Erie 28L: SOLD 3-Drum Machine, Cabled Up, Long "Bradford" Mast (+/- 60'), No Braces, uses Guide Wires. Last ran Late 2016. Tools Available for an Extra Cost.
Sold - SRS #4087
DESCRIPTION: 1979, Chicago Pneumatic; Model: T-650; Compressor: 825/350 GHH; Engine: CAT 3406; Mounted On: 2002 Mack; Condition: SOLD; Tools/Options: Chicago Pneumatic T-650 Year: 1979: SOLD Mud Slayer on Deck, Very Fast Feed and Rotation, Updated to a P7 Main Pump. New Chains in 2018, Brand New Tires all Around, Feed Cylinders Repacked in 2021, New Western Rubber Swivel and Remanufactured Planetary. This is only a partial list of all upgrades and Repairs, full list available on request. Capable of Carrying 480' of 4" Drill Rod. Rig is Capable of Running a Casing Hammer, had an Atlas R2000 on it but has been removed. Truck has high miles, over 600K. SOLD
Sold - SRS #4085
DESCRIPTION: Schramm; Model: T 64; Compressor: 450/250; Engine: Detroit 8V71; Mounted On: 1989 Ford F-900; Condition: SOLD; Tools/Options: Schramm T64: Hydraulic Lift Cylinders and Pullback Cylinders have been Rebuilt. Hydraulic Hoses have been Replaced. Includes 400' of Used Drill Rod, (2) 6" Mincon Hammers, (1) 8" Bit, (1) 6" Bit, all Used. Piston Compressor needs a Rebuild. SOLD
Sold - SRS #4063
DESCRIPTION: Mud Pump: Edge 350 Mud System; Mounted On: Skid; Truck Engine Make: Honda GX 690; Condition: SOLD; Tools/Options: Model #PS3500B. Hours Unknown. 350 Gallon Mud Tank SOLD
Sold - SRS #3244
DESCRIPTION: 1986, Failing; Model: 1750 Holemaster Reverse Circulation; Compressor: LeRoi 253S2B; Mud Pump: (2) Mission Magnum 3X4X13 Reciprocating; Engine: PTO; Mounted On: 1997 Mack; Truck Engine Make: Mack CL713 427 HP Reconditioned; Condition: SOLD; Tools/Options: Failing 1750 Holemaster RC: SOLD Tools/Other Options: Rig is set up for either Flooded Reverse Circulation or Conventional Mud Rotary Drilling, 6" ID through Swivel and Tophead Drive, Table Opening is approx. 8-3/4" the table inserts also come out to set casing and the table opens 8+ inches as well as opening up to set tooling. Owner Believes it is Capable of Setting 18" Casing. Tophead Drive has 2,400 Ft.-Lbs Torque @ 1-120 RPM, Tilts Horizontal for Making Connections off a Trailer. Derrick is Rated for 100,000# Static Hook Load Capacity, 55,000# Total Pulling Capacity with a 4-Speed Drive (up to 309 Ft./Min.), Pulldown Chains, Single Drum Drawworks with 15,000# (60,000# on 4-Part Line, 22-Ton Traveling Block). 36' Derrick that Handles up to 25' Casing, Cathead, Mast Mounted Safety Line. Truck has approx. 569,284 Miles on it. Diesel Engine is a 427 HP and has been Reconditioned (low hours since), has an Engine Brake. Reconditioned 8-Speed Eaton Transmission with Deep Reduction Selector. Also Includes a Custom Pipe Trailer (designed by GEFCO) with Slide, Battery or Truck Powered Crane, 590' of 6-5/8" O.D. X 20' Hacker Thread Drill Pipe, 200' of 2" Tremmie Pipe, 1-1/4" Schedule 40 Pic Airline & Couplers, Extra Fittings, Tool chest, 6" I.D. Dual Helix Discharge Hose, 2" Air Hose, 4" Suction Hose with Screen, 20' 6" X .25 Flow Pipe, Elbows, I-Beams. Tooling Includes: Breakout Tongs, Slides, J-Hook, Semco 14" & 16" Heavy Duty Elevators, 20' 10K Drill Collar, 32" Drag Bit, 28" Moab Tricone Roller Bit, 19" TCI Bit, 15" Roller Bit, Swab, Lifting Bail. Also Available for an Extra Cost is a Sullair 375H Air Compressor Powered by a John Deere Engine, approx. 5,554 Hours. Complete Setup, Ready for Work. SOLD
Sold - SRS #3872
DESCRIPTION: Bucyrus Erie; Model: 22W Series III; Engine: 4-Cyl. Continental; Mounted On: 1990 Ford F-700; Condition: SOLD; Tools/Options: Bucyrus Erie 22W Series III: Three Hydraulic Jacks & Hydraulic Derrick, Tool Guide. Rig has approx. 750' of 5/8" Drill Line and approx. 750' of 7/16" Sandline. SOLD
Sold - SRS #4084
DESCRIPTION: 1998, CME; Model: 45C; Engine: PTO; Mounted On: CME Tracks; Truck Engine Make: Deutz F2L912; Condition: SOLD; Tools/Options: CME 45C Year: 1998: Rig Hour Meter Currently Reads Reads 4,537. Slide Base and Wiggle Tail, Moyno 3L6, Two Winches. Recent Maintenance Includes Hydraulic Hoses and Fittings, Clutch, Auto Hammer Chain and Motor, Starter, Throttle Motor and Electrical Fittings, Transmitter & Receiver including Remote. PSA's, Moyno Pump, Bushings in Sheaves, Feed Cylinders, Winch/Wireline, Kill Switch & System, Kelly Bar Bushings. Tandem Axle gooseneck trailer is available for an extra cost. SOLD
Sold - SRS #4052
DESCRIPTION: Flat Tank; Mounted On: 1999 Peterbuilt; Truck Engine Make: CAT C12; Condition: SOLD; Tools/Options: 2,000 Gallon Flatwater Fleet Water Bed, 20' Bed, 500 Gallon Transfer Tank Never Used, Truck has a Pintle Hitch and is Plumbed for Trailer Air, 3-Stage Jake Brake, 10-Speed Fuller Manual Transmission, Full Lockers on the Rear, Axles Rated at 12,000# Front, 19,000# Rears, GVW 80,000#. There is a pipe slide that has been removed that is available. Odometer Reads 778,436 Miles. SOLD
Sold - SRS #4051
DESCRIPTION: 1998, Ingersoll Rand; Model: T3W; Compressor: 900/350; Mud Pump: 3X4 Centrifugal; Engine: CAT 3406; Mounted On: 1998 IHC Paystar 2674; Truck Engine Make: CAT 370 C10; Condition: SOLD; Tools/Options: Ingersoll Rand T3W Year: 1998: SOLD 18,000# Winch, 7-Rod Carousel Rig is set up to run 4.5" Drill Rod with 3.5" Reg. Threads, Retractable Table, 34,000# Pulldown, Swinging & Extendable Jib, Air Operated Holding Wrench, 2-1/2" Air Piping, 3" ID Spindle, 7-Gallon Oiler, 18 GPM Bean Water Injection Pump, Four Leveling Jacks. Truck has a 10-Speed Manual Spicer Transmission and a Jake Brake. Mud Pump Installed in Late 2021. Deck Engine Rebuilt in 2019 (approx. 2,800 Hrs. on Rebuild), Carousel Gearbox Rebuilt in 2018, New Radiator Deck Motor in 2018, Tophead Replaced in 2019, Tophead Motors Rebuilt in 2020. Truck has approx. 87,430 Miles on it, 58,000# GVW. All Cables Replaced in 2022, Only Drilled One Hole since Replaced. Good Maintenance & Replacement During Ownership. Cosmetics need some TLC. Approx. 500' +/- of pipe is available for an extra cost. SOLD
Sold - SRS #4081
DESCRIPTION: 1998, Driltech - Tamrock; Model: T40K; Compressor: Sullair 900/350; Engine: CAT 3406; Mounted On: CCC; Truck Engine Make: CAT 3306; Tires: Good; Condition: SOLD; Tools/Options: Drilltech Tamrock T40K Year: 1998: Hour Meter on the Deck Engine Reads 8,526, Drill is a Working Drill. Set up to run 4.5" O.D. X 25' Drill Pipe, 6-Rod Carousel, One Winch, Water Injection, Hammer Oiler. Table Opening has Slips in it from 8" to 10" Opening? Carrier Miles Unknown. No Pipe Rack on Drill. Includes 200' of Pipe, another 200' + of Drilltech 4.5" X 25' Pipe is Available for an Extra Cost. SOLD
Sold - SRS #4080
DESCRIPTION: Smeal; Model: 5T; Mounted On: Unmounted or Truck can be Included; Tools/Options: Smeal 5T: No Sandline. A 2001/02 Ford F-450 (Mfg. 9/2001 Powered by a 7.3 L Diesel Engine is Included but Hoist is not Mounted on it. Truck Odometer Reads 211,402 Miles. When Truck was new it Originally had a Pulstar Pump Hoist Mounted on it, 5-Speed Transmission, 19" Wheel & Tires, 2WD, F-450 Single Cab, Bed is approx. 11' Long. Hoist would need a PTO to run or it could be Powered with a Motor on the back. It has New Batteries and Seat has been Repaired on Drivers Side. It has one Dent about Fist Size on the Passenger Front Fender at the Bottom, Windshield Seal is Pushing out. Would Sell the Pump Hoist Unmounted also.
Sold - SRS #4079
DESCRIPTION: Mounted On: 1993 Peterbilt; Truck Engine Make: Cummins N14; Condition: SOLD; Tools/Options: Approx. 1,500 Gallon Flat Tank Water Bed, 12,000# Hydraulic Crane, Miller Welder. 13-Speed Transmission, Jake Brake. Good Runner. SOLD
Sold - SRS #4078
DESCRIPTION: 2007, Diedrich; Model: D-25; Engine: 22 HP Gas; Mounted On: IHC Tracks; Truck Engine Make: 4-Cylinder Kubota; Condition: SOLD; Tools/Options: Diedrich D-25 Year: 2007: Two Winches, In/Out Slide, Side Shift Wiggle Tail, Tower is approx. 15', 4-Speed Rotary Head, Split Drawworks for Limited Access Drilling. Carrier has approx. 1,100 Hours and Drill has approx. 1,700 Hours. Includes approx. 98' of 4.5" Solid Stem Auger, Extensions and Adapters. Other tooling is available at an additional cost. Drill is set up and plumbed for air rotary and bedrock coring. Clean rig with low hours. Hydraulic hoses show no wear. All maintenance was recently done on drill and had a tune up on deck engine. SOLD
Mud Grout Pumps - SRS #4077
DESCRIPTION: Edge; Model: 550; Engine: 24 HP Honda; Mounted On: Skid; Condition: OFF MARKET; Tools/Options: Edge 550 Mud System. 500 Gallon Mud Tank. Double Screen Shaker, 4' X 3' Bottom Screen, 3' X 3' Desanding Screen, Dual Cones, 2X3 Centrifugal Mixing Pump. OFF MARKET
Sold - SRS #4069
DESCRIPTION: 1979, Ingersoll Rand; Model: TH-60; Compressor: 750/250; Mud Pump: Gardner Denver 5X6; Engine: PTO; Mounted On: 1979 International Paystar 5000; Truck Engine Make: Detroit 8-92T Silver; Tires: Near New; Condition: SOLD; Tools/Options: Ingersoll Rand TH-60 Year: 1979: SOLD 2nd Owner, Deep Hole Package 32,500# Pullback, Bean 18 GPM Injection Pump with Oil Injection, Standard 34' Mast, 9-Rod Carousel, 3.5" IR Drill rods. Detroit Engine was a Factory Rebuilt Exchange in 2005/6, Square Tube Tower always bolted when up. Upgraded with Near New 11R 22.5 Rear Wheels and Tires, New 425/55 R22.5 Super Single Steering Wheels and Tires. 2-Speed Gear-Matic 35 Casing Winch Line is 18,000# Bare Drum, 3-Speed Pullback and 2-Speed Rotation. High Speed Spindle Rotation is 240 rpm @ 2,500 ft./lb. Torque, Low Speed 120 rpm @ 5,000 ft./lb. Nice Straight Operator Platforms and an Added Lower Table Hinge. 75 Gallon Highway Fuel Tank and a 180 Gallon Off Road Fuel Tank with DOT Approved Connections. New Pullback Cables 6 Months Ago. Was working daily - no help available. Parts Manual Available. Approx. 1,000 of 3.5" X 20' IR Long Flat Drill Pipe with 2-3/8" Threads available for an extra cost. O.D. measures a little over 3-15/32", Good Condition is Available for an Extra Cost. May be a few 15'ers. SOLD
Sold - SRS #3780
DESCRIPTION: 1987, Jaswell; Model: J-2400; Compressor: 1050/350 Sullair Hi/Low; Engine: 12V92TA; Mounted On: 1977 Paystar 5000 AWD; Truck Engine Make: 671; Condition: SOLD; Tools/Options: Jaswell J-2400 Year: 1987: Second Owner. 4-Cylinder Bean Pump, 50K Pullback. Low Hours (approx. 3,000 - 3,500). Square Tubing Derrick, Gearbox Pumps. Rebuilt Deck Engine. Operational & Well Maintained. Rig is Set Up to Run 4.5" X 20' Drill Pipe 3.5" Box and Pin. Approx. 400' of Rod and Some Tooling and Bits Available for an Extra Cost. SOLD
Steel - SRS #4075
DESCRIPTION: Steel; Condition: Good; Tools/Options: (40) Joints, 800' of 4-1/2" O.D. X 20' Drill Pipe with 3.5" Pin & Box, Wrench Flats. Used on One Job.
Sold - SRS #4074
DESCRIPTION: Aluminum Barge; Model: 12' X 40'; Truck Engine Year: (2) 225 HP Mercury; Condition: SOLD; Tools/Options: Aluminum Barge 12' X 40' : SOLD 12' X 40' Aluminum Barge, Built to Military Specifications. Actual Width is 11' 11-7/8" so it does not need an escort for highway travel, wide load permit only. At least 35' of usable steel reinforced deck. Barge was used for drilling and vibracore testing in rivers, bays and lakes. Heavy hauler capable of hauling trucks, equipment or use as a ferry. Includes: Aluminum A-Frame, 40' Flat Gooseneck Trailer. Th barge built new has been estimated to cost well over $150K. Can be Delivered for an Additional Fee.
Sold - SRS #4073
DESCRIPTION: G&R; Model: 5 Ton; Engine: PTO; Mounted On: 1996 Ford Super Duty 2WD; Truck Engine Make: 7.3 L Diesel; Condition: SOLD; Tools/Options: G&R 5 Ton: Smeal Parts are Interchangeable, 5-Speed Manual Transmission. No Remote but has a plug in Space on Valve Bank but would need a New solenoid. Does not have High Idle Switches but has a Turn Screw on the Throttle Pedal to Raise Idle. Truck and Hoist were gone through in 2016/17. Sandline, Two Pipe Racks, 9' Reading Service Bed. New Hydraulic Hoses, Newer Clutch with Single Mass Flywheel and all Related Components Replaced, Newer Front and Rear Windshields, Newer Cable, Seat was Reupholstered, Includes lots of tools and pipe fittings: 1", 1.25", 1.5", 2" Elevators, 600' Sounder (tooling to be confirmed).. Truck has approx. 133,859 Miles on it. SOLD
Sold - SRS #3999
DESCRIPTION: Bucyrus Erie; Model: 22W; Mounted On: Unmounted; Condition: SOLD; Tools/Options: Bucyrus Erie 22W: SOLD Includes (2) Drill Bits, Stem, Casing Driver and Bumper Bar. Derrick hoisting system removed, was going to convert it to Hydraulics. TRUCK IN PHOTO IS NOT INCLUDED
Rotary M - SRS #4071
DESCRIPTION: 2021, Melis; Model: MD 300; Compressor: None; Mud Pump: Triplex 535 Piston; Engine: PTO; Mounted On: Steel Tracks; Truck Engine Year: Cummins QSB 6.7L - Tier 4; Condition: New; Tools/Options: Melis MD300 Year: 2021: Heavy Duty Diamond Drilling & Reverse Coring Rig, Tier 4 Engine. Mud Pump has Danfoss Hydraulic Motor, Pump Capable of 500 psi Working Pressure and 700 psi Maximum Pressure. Kawasaki Main Hydraulic Pump, Rexroth 2nd Pump and 3 Gear Pumps by Casappa/Hema - Maximum Pressure is 4,200 psi, FL70 Longyear Type Rotation Unit, 4-Gear Transmission, Capable of 45° to -90° Vertical Drilling Angles. Has approx. 10' Feed Stroke, 48,000# Feed Pull and 35,000# Feed Thrust. Telescopic Folding Mast, 19,000# Braden Main Winch, Wireline Winch. Strickland Crawler 8-12 Tons. Carrier is Equipped with Fast Walking, it can pace faster than many crawlers. Capable of Drilling with BQ (dry well approx. 1900' & Wet Well approx. 3,280'), NQ (dry well approx. 1,575' and wet well approx. 2,460'), HQ (dry well approx. 984' wet well approx. 1,640') and PQ (dry well approx. 492' and wet well approx. 656'). Liquid Cooler Turbo Charged Diesel Engine. Some Drill Pipe is Available.
Sold - SRS #4065
DESCRIPTION: Amthor; Mounted On: 2000 Volvo Autocar; Truck Engine Make: Cummins N14 525 HP; Condition: SOLD; Tools/Options: 2,300 Gallon Amthor Water Bed, 6,000# Crane that extends to 20', Model 800 Winch (approx. 20 Ton). Truck has a Fuller RTLO Standard Transmission and approx. 46,309 Miles on it, (2) 100 Gallon Fuel Tanks, Tool Boxes, Night Lights, Fuel Pump. 18,000# Front, 46,000# Rears. Crane is Conveniently Located on Drivers Side for easy access to Rod & Work Space on Bed. 80,000 GVW. SOLD
Sold - SRS #4060
DESCRIPTION: 2005, GEFCO; Model: 30K; Compressor: Sullair 1000/350; Mud Pump: 3X4 Centrifugal 2.5" Mud Piping; Engine: PTO; Mounted On: Peterbilt 357 6X4; Truck Engine Make: CAT C-15 Rated at 525 HP @ 2100 RPM; Condition: SOLD; Tools/Options: GEFCO 30K Year: 2005 : SOLD 30,000# Pullback, Retracting Tophead with 70,000# of Torque, 1-120 RPM and 29' of Travel. Rig has a Swinging Jib Boom with 32,000# Winch Hoisting Capacity with 2-Part Line. 7 Gallon Hammer Lubricator, 18 GPM Water Injection Pump, Single rod Loader, Pipe Spinner, Retractable Table, Pipe Rack, 6-Rod Carousel, Rig is set up for 4.5" O.D. Drill Rod with 2-7/8" IF Threads (crossover subs available). Rig Lights, Remote Jib Controls for Helper. Truck Odometer Reads 24,625 Miles and 1,450 Hours. Compressor Hour Meter Reads 4,301. Rig can Carry approx. 500' of Rod. Drill Rod available for an Extra Cost. SOLD
Sold - SRS #4053
DESCRIPTION: Geo-Loop; Model: 50-500; Engine: Honda GX690; Mounted On: Box Frame/Skid; Condition: SOLD; Tools/Options: Geo-Loop 50-500: Includes a Hydraulic Hose Reel, Sand Hopper/Mixing Tank. SOLD
Rotary P-Q - SRS #4056
DESCRIPTION: Portadrill; Model: 10TG; Compressor: LeRoi 256 S2; Mud Pump: GD 5X6; Engine: Detroit 318; Mounted On: 1986 Paystar 5000; Truck Engine Make: 300 Cummins; Condition: Rig has been sitting; Tools/Options: Portadrill 10TG: Kelly Bar, 5-Speed Transmission, 10" Retractable Table, 37' Derrick, Cable Drawworks. Truck has an 8L Transmission, 20,000# Front Axle and 46,000# Rears. Includes 300' of 4.5" Drill Rod with 2-7/8" IF Threads, (4 -15' Joints and 12 that are 20' lengths). Rig has been sitting for approx. 6-8 years but the truck is run every year.
Sold - SRS #4030
DESCRIPTION: 1989, Pulstar; Model: P20; Engine: PTO; Mounted On: 1992 GMC Topkick 2WD; Truck Engine Make: D7466; Tires: Good; Condition: SOLD; Tools/Options: Pulstar P20 OHRGPP: SOLD Wire Winder, No Sandline, Flatbed with a Lot of Tool Boxes. Truck has a 6-Speed Transmission and approx. 318,493 Miles on it.
Sold - SRS #4055
DESCRIPTION: Mud Pump: 7-1/2" X 10" Centerline; Mounted On: Unmounted; Condition: SOLD; Tools/Options: 7-1/2" X 10" Centerline Duplex Mud Pump.
Sold - SRS #4068
DESCRIPTION: 1992, Smeal; Model: 5T; Engine: PTO; Mounted On: 2006 Ford F350 2WD; Truck Engine Make: 6.0 L Diesel; Condition: SOLD; Tools/Options: Smeal 5T Year: 1992: No Sandline, Two Pipe Racks, High/Low Speed Winch. Truck has an Automatic Transmission and approx. 156,000 Miles on it. Very Nice Condition for the Age, Rig has Next to no Rust, No known Major Issues. Clear Title. SOLD
Sold - SRS #4067
DESCRIPTION: 2004, Schramm; Model: T300; Compressor: 400/200; Mud Pump: GD 5X6; Engine: PTO; Mounted On: 2003 Chassis; Truck Engine Make: Diesel; Condition: OFF MARKET; Tools/Options: Schramm T300 Year: 2004 OFF MARKET Compressor: FMC Water Injection Pump. Less than 1,000 Hours on Newer Engine, Rebuilt Hydraulic Pumps and Motors. Includes 300' of Mayhew Jr Drill Rod.
Sold - SRS #4066
DESCRIPTION: 2008, Speedstar; Model: 50K; Compressor: Sullair 1050/350; Mud Pump: 3X4 Centrifugal; Engine: PTO; Mounted On: 2009 Peterbilt 367; Truck Engine Make: CAT C15 550 HP; Condition: SOLD; Tools/Options: Speedstar 50K Year: 2008: SOLD New Clutch Fan and Clutch Assembly along with Radiator, approx. 1 Year Ago (2021). Truck Engine Oil was changed every 300 Hours. New Compressor Oil & all Filters changed Last Year (approx. 600 hours on them). Mud Pump Recently had the Expendables Replaced. Includes approx. 420' of Drill Rod. 6,901 Total Hours. Hub Meter Reads 1,926. Low Miles, approx. 22,652? Can Sell as a Package Deal for Extra Cost that would Include a 2007 Kenworth T800 with a 2,300 Gallon Older Flat Tank Water Bed and Crane, Torches, 100' Hose Reel, Fuel tank with 50' Reel. New Flotation Tires on the Front with approx. 10 Miles on them, Good Tires on the back. Truck has approx. 400K Miles, Jake Brake, Full Lockers, 20' Bed, 20K Front Axle and 40K Rears. Centrifugal Pump on the Back for Water Transfer, Hydraulics Plumbed in. RIG HAS BEEN SOLD
Mud Grout Pumps - SRS #3833
DESCRIPTION: Mud Pump: Myers D65-20; Engine: V8 Gas; Mounted On: Trailer; Tires: New; Tools/Options: Myers D65-20 High Pressure Triplex Mud Pump: Belt Driven Pump, Trailer and Pump are in Good Condition but it will need a New Engine.
Sold - SRS #4054
DESCRIPTION: Mud Pump: Gardner Denver 5X6 Duplex; Mounted On: Unmounted; Condition: SOLD; Tools/Options: GD 5X6 Duplex;: Had been used on and IR T3W, recently removed. SOLD
Sold - SRS #4006
DESCRIPTION: 2000, Ingersoll Rand; Model: T3W; Compressor: IR 900/350; Engine: CAT 3406; Mounted On: IHC 2674; Truck Engine Make: Navistar 370 HP; Condition: Working Drill - Rebuilt; Tools/Options: Ingersoll Rand T3W Year: 2000 : SOLD Rig had been gone through a few years ago approx. 2017(compressor, cooler, electronics, hydraulics, Fenders, paint). Currently has approx. 1,200 Hours Since Rebuild. Recently had a New Main Pump Installed, Tophead Rebuilt from Top to Bottom, New Truck Exhaust, Box Built Behind Cab for Blocking. Engine has approx. 13,000 Original Hours on it. Deck Engine Hour Meter has been Replaced, Standard 33' Mast, Clutch between Air End and Engine. 8,000 Ft. Lbs. Torque, Single Speed Rotary Head, Torque Limit, 18 Gallon Bean Water Injection, Single rod Loader, Set Up for 4.5" O.D. X 2-7/8" Thread Pipe, 7-Pod Carousel, King Swivel on Rotary Head, Hydraulic Pump (controls & Piping to Operate). 20,000# Front Axle, 46,000# Rears (no spin rears), Jake Brake, Aluminum Platforms, Air Horn, AM/FM Radio, Special Off Road Hi Traction Rear Tires. Truck has approx. 75,000 Miles on it. Includes Hydraulic Welder.
Sold - SRS #2864
DESCRIPTION: Gardner Denver; Model: 1500; Compressor: 256 LeRoi; Mud Pump: 5-1/2" X 8" Duplex; Engine: PTO; Mounted On: 1977 Peterbuilt; Truck Engine Make: 400 Cummins; Condition: SOLD; Tools/Options: SOLD One Owner Rig, 38' Mast, 3-3/4" X 24' Holley Swivel, 7-1/2" Rotary Table. Truck has a 13-Speed Transmission. Includes approx. 1,020' of 2-7/8" Drill Rod - 50%, Slips, Two Collars, Mud Hopper with 7-Sample Trough. One Mast Raising Ram is Leaking. SOLD
Sold - SRS #4046
DESCRIPTION: 1996, Smeal; Model: 5T; Engine: PTO; Mounted On: 2016 Ford F-550 2WD; Truck Engine Make: Powerstroke Diesel; Condition: SOLD; Tools/Options: Smeal 5T Year: 1996: SOLD Oil Cooler, Standard Mast, Mainline & Sandline (sandline needs some work), has a Remote but it is not in Working Order. Truck has an Automatic Transmission, Odometer Reads 35,441 Miles, 2,140 Engine Hours and 1,235 Idle Hours. Working Unit, Hours Subject to Change. SOLD
Sold - SRS #4024
DESCRIPTION: 1995, Schramm; Model: T300 M; Compressor: Sullair 300/200 w/ Clutch; Mud Pump: GD 5X6, 4X3 Centrifugal; Engine: PTO; Mounted On: 1995 Ford FT 900 6X4; Truck Engine Make: Cummins 8.3L; Condition: SOLD; Tools/Options: Schramm T300 M Year: 1995: SOLD All Hydraulic Rig, 50 GPM Hydraulic Pump, 18,000# Pullback, 23.5' Head Travel, 14" Table Opening, Winch, (1) Front and (2) Rear Hydraulic Outriggers, Front & Rear Tow Eyes, DOT Lights, Helpers Platform, Carousel Holds 7-Rods plus Stabilizer, Angled Rod Box, Floating Sub, Hydraulic Jib Boom, Hydraulic Breakout Wrench & Holding Wrench, Jet Mud Mixer, Extra Tool Box, 5X6 is a Piston Pump. Hub Meter Reads 023417, Odometer Reads 320,533, "C" Series Cummins Engine, 250 HP. Engine Hours 3535.2 and has a 13-Speed Transmission. Includes approx. 520' of Schramm Drill Rod, 3-1/2" X 20' X 2-3/8" IF Tool Joints - 13 Rods are Newer, (1) Used 15' X 7-1/2" Winged Reamer/Stabilizer, Rosewall Grouter with Bowie Pump. Recent Upgrades/Repairs: New Front Tires, New Mud Tub, New Conductor Pipe. Hydraulic Motor Rebuilt on the Mud Pump. SOLD
Sold - SRS #4062
DESCRIPTION: Mud Puppy; Model: 255-25C; Mounted On: Trailer; Condition: Good; Tools/Options: Mud Puppy 255-25C: Hour Meter Reads 1,652 Hours. New 2X3 Pump in 2021.
Rotary S - SRS #4061
DESCRIPTION: Speedstar; Model: SS 15 II; Compressor: LeRoi 250; Mud Pump: GD 5X6; Engine: PTO; Mounted On: Ford 9000; Truck Engine Make: CAT 3406; Condition: OFF MARKET; Tools/Options: Speedstar SS 15 II : Compressor is either a Sullair or LeRoi. 8" Retractable Table, Air Clutches, 35' Mast, 60,000# Pullback. Miles Unknown, Odometer Turns while Drilling. Truck has a 13-Speed Eaton Transmission, Good Rig, Motor is Strong. There is approx. 360' of Drill Pipe available, Amount to be Confirmed. OFF MARKET
Sold - SRS #4058
DESCRIPTION: 1974, Portadrill; Model: 524; Compressor: LeRoi 100SD2 2-Stage, 750 CFM @ 40 psi - 600 CFM @ 125 psi; Engine: PTO; Mounted On: 2003 Sterling Tandem Axle; Truck Engine Make: Cummins; Condition: SOLD; Tools/Options: Portadrill 524 Year: 1974: SOLD 750 CFM @ 40 psi or 600 CFM @ 125 psi. 42' Mast, 7-1/2" Retractable Rotary Table Mechanically Powered through a 4-Speed Transmission, Mechanical Powered Double Drum Drawworks, Sandline Drum, (3) Hydraulic Leveling Jacks, Side Pipe Rack for 20' Drill Pipe, Hydraulically Powered 3-Cylinder Bean Water Injection System, 3-1/2" X 24' Fluted Kelly and Drive Bushing, Breakout Wrench, 10 Joints (200') of Used 3" X 20' X 2-3/8" IF Tool Joint Drill Pipe (slotted for Breakout), Slips & Misc. Bit Subs Included. There is Room on Board Behind Cab to Mount a 5-1/2" or 7-1/2" X 8" Mud Pump. SOLD
Rotary T-Z - SRS #4057
DESCRIPTION: 2007, Versa Drill; Model: V-2000NG; Compressor: 1250/350 IR Doosan; Mud Pump: None; Engine: PTO; Mounted On: HME 6X6; Truck Engine Make: 630 HP CAT C18 Tier 3; Tools/Options: Versa Drill V-2000NG Year: 2007: Compressor has approx. 6,011 Hours on it. 80,000# Pullback, Automated Pipe Handling System for 500' of 4.5" Drill Rod.10-3/4" Center Opening in the Table, Opens to 20". 2-Motor Combination Planetary/Spur Gear, Variable 3-Speeds Torques: 8,100 ft.-lbs. @ 125 RPM, 5,840 ft.-lbs. @ 175 RPM, 3,545 ft.-lbs. @ 250 RPM. 25 GPM Water Injection Pump, 18K Main Winch with Jib Boom, 8K Auxiliary Winch with Jib Boom, Line Oiler, Aluminum Catwalks, Night Lights, Hammer Holders. Compressor has approx. 6,011 Hours on it, Current Rig Hours - 8,675, Truck Miles - 47,181 and 10,553 Engine Hours. Cotta Box Replaced Dec. 2020. Front GVWR 69,000, Rear GVWR 23,000. No Tooling Included
Sold - SRS #4016
DESCRIPTION: CME; Model: 45C; Engine: Air Cooled Deutz Diesel; Mounted On: CME 55 Trailer; Condition: SOLD; Tools/Options: CME 45C: SOLD Owner Believes it is a 1993 Year Model. Air Cooled Deutz Diesel, Moyno Pump (3L6?), Auto Hammer, Skid & Mainline Winches, Angle Drill Capable, Slide Base/Wiggle Tail, Standard Mast, No Remote. Recently on a Small Job (March 2022). No Tooling Available. Hour Meter Reads 5,189.
Rotary G - SRS #3037
DESCRIPTION: 1980, Gardner Denver; Model: 1700; Compressor: N/A; Mud Pump: 5-1/2" X 8"; Engine: PTO; Mounted On: 2002 Western Star; Truck Engine Make: CAT C12; Condition: OFF MARKET PUT BACK TO WORK; Tools/Options: Gardner Denver 1700: OFF MARKET PUT BACK TO WORK. Approx. 1406 Hours, Truck has 380,000 miles on it. Miles are not actual, the computer reads the transmission the whole time it's spinning so when the rig is in rig gear the truck is reading miles. The drawworks are rated at 15,000# single line and the rig is set up to run up to 4 lines. Recommended operating is approx. 45,000#. 44' Mast that is Flanged for an Extension and is Wider to Accommodate Larger Casing. Rig Could Easily do Large Diameter Wells or RC. Mud Pump has A New Fluid End and New Clutch. New 2" Swivel and 23' X 3-3/4" Fluted Kelly, Air Clutches. 10-Speed Rotary Transmission & a 10" (recently rebuilt - 2022) Retractable Rotary Table . Price includes a new table. New Rotary Clutch, Hydraulically Driven Sand Reel, Run with Air Clutch & Brake. Tandem-Tandem Truck with a 13-Speed Transmission and a Spicer 792 Gear Box PTO. Drill Rod available for an Extra Cost.
Sold - SRS #4036
DESCRIPTION: Gardner Denver; Model: 15W HD; Compressor: 900/350 Sullair; Mud Pump: 7-1/2" X 10"; Mounted On: CCC; Truck Engine Make: Cummins N14 400 HP; Condition: SOLD; Tools/Options: Gardner Denver 15W HD: Air Clutches, 10" Retractable Table, 38' Mast, Break-Out Wrench. Has Subs to run 2-7/8" Bottleneck, 3.5" or 4.5" Drill Pipe. Newer 28' Kelly & 3" Little Giant Swivel (2015). Rig has 3" Plumbing. Mud Pump and Drawworks had been gone through prior to parking it. New Gear end in Mud Pump. No Pipe Available.. SOLD
Sold - SRS #3750
DESCRIPTION: 2000, Reichdrill; Model: T-650 W II; Compressor: 850/350; Engine: CAT 3406; Mounted On: 2000 Freightliner; Truck Engine Make: CAT C-12; Tools/Options: Reichdrill T-650 W II Year: 2000: SOLD New Rebuilt Compressor, 2020. Deck Engine had a Rebuild (new block also) in 2018.Approx. 1,299 Hours Since. New Rubbers on Suspension. Compressor has approx. 500 hours since rebuilt. Fresh Oil in Compressor and Fresh Oil in CAT Engine. Truck has approx. 31,421 Miles on it. Rig has approx. 12,000 Total Hours. SOLD
Sold - SRS #4049
DESCRIPTION: 1972, Smeal; Model: 3T; Engine: PTO; Mounted On: Chevy 3500 4WD; Truck Engine Make: 6.5L Diesel; Condition: SOLD; Tools/Options: Smeal 3T Year: 1972: Truck Odometer Reads 180,743 Miles, Sandline, Hydraulic Outriggers, Pipe Racks, Power to Rear, Utility Bed. SOLD
Auger - SRS #4048
DESCRIPTION: 1991, CME; Model: 75; Engine: Ford 300 6-Cyl.; Mounted On: 1992 Morooka MST 1500 Tracks; Truck Engine Make: Mitsubishi 6-Cylinder Diesel; Condition: Looks and Runs Great; Tools/Options: CME 75 Year: Auto Hammer, Wiggle Tail, Rod Breaking Clamp, 5-Speed Transmission with Slip Clutch, 3L8 Moyno, 400 Gallon Stainless Steel Water Tank, One Auger Rack, 3 Jacks, Four Kill Switches, 3 Winches, 3 Tool Boxes. Rotary Box & Right Angle Drive are Tight with New Bushings & Kelly Bar, Good Tracks, Looks and Runs Great.
Sold - SRS #3972
DESCRIPTION: Chicago Pneumatic; Model: T-650WS HH; Compressor: 850/350 GHH; Engine: CAT 3406B 450 HP; Mounted On: Ford1979; Truck Engine Make: Cummins 300 HP; Condition: SOLD; Tools/Options: Chicago Pneumatic T-650 WS HH : SOLD Clean and Rebuilt, (all pumps & gearbox rebuilt within the last few years, engine approx. 5 years ago). The engine was taken out and replaced with a complete rebuild, The compressor probably has <1,000 hours . Little use since. Heavy Hoist, Larger Chains and Sprockets, Custom Heavy Duty Tophead, Dual 2-Speed Motors. Holte Casing Advancing System with the 350 Holte Upper Hammer, Hydraulic Cylinder Casing Handling Package. Truck has 57,000 Miles on it. 800' of Drill Pipe Available for an Extra Cost. SOLD
|
Southern Office: 1485 DeSoto Blvd N Naples FL 34120 Phone: 239.774.1939 |
Northern Office: Oil City PA 16301 Phone Toll FREE: 1.888.204.3907 |