Rigs
Sold - SRS #4201
DESCRIPTION: 1990, Schramm; Model: T450; Compressor: 750/300; Mud Pump: None; Engine: 8V92; Mounted On: 1988 Ford F 900; Truck Engine Make: 6-Cylinder; Condition: SOLD; Tools/Options: Schramm T450 Year: 1990: Rig has 8,000 Original Hours, 2nd Owner. Includes 400' of 4.5" OD Drill Rod, 8" Stabilizer, 8" Hammer, 6" Downhole Hammer, 6" Casing Driver, 8-3/4" Steel Tooth Bits. Drill has New Compressor Oil, New Oil Separator Filters, Hydraulic Filters, Various Water Pump Parts, Air Line Fitting and Many Filters. Truck has a 13-Speed Transmission. SOLD
Pump Hoist - SRS #4115
DESCRIPTION: 2013, Hunke; Model: 5T; Engine: PTO; Mounted On: 2013 Dodge 5500 4WD; Truck Engine Make: Cummins; Tools/Options: Hunke 5T Year: 2013: OFF MARKET. Hoist has Long Rear Jacks, Hydraulic Sandline (no clutch), Wired Remote and Standard Mast. Truck has a 6-Speed Transmission, New PTO & Hydraulic Pump in August 2022. New Turbocharger in Nov. 2022. Truck Currently has 165,805 Miles on it. Truck has Hail Damage (dents) on the Hood & Roof but Paint didn't Crack.
Sold - SRS #3722
DESCRIPTION: G&R; Model: 500; Engine: PTO; Mounted On: 2014 GMC 3500 4X4; Truck Engine Make: Duramax Diesel; Condition: Working Unit; Tools/Options: G&R 500: Truck is a Crew Cab and has an Allison Automatic Transmission. Truck has approx. 127,932 Miles on it. Mast Raising Cylinders were Rebuilt in 2024.
Sold - SRS #4109
DESCRIPTION: 2007, Versa Drill; Model: V-2000NG; Compressor: IR/Doosan 1250/350; Mud Pump: Hydraulics There; Engine: PTO; Mounted On: 2006 Hendrickson 3-Axle 6X6; Condition: SOLD; Tools/Options: Versa Drill V-2000NG Year: 2007: SOLD Approx. 12K Hours, 29K Miles. Complete Hydraulic Rebuild (pumps, motors, hoses), lots of Rebuilds. Valve Banks and a New Tophead Motor. Pipe available for an Extra Cost. SOLD
Sold - SRS #4188
DESCRIPTION: 2010, Schramm; Model: T-455; Compressor: 1050/350 with Clutch; Engine: CAT C15; Mounted On: 2008 Sterling; Truck Engine Make: 400 HP Mercedes; Condition: SOLD; Tools/Options: Schramm T-455 Year: 2010: Built Prior to I Controls. 40K Pullback, 180° Swinging Jib, 15K Winch. No Rod Box, has a Tubular Mast and a 275' Carousel. Set up for 4.5" Pipe. Rig has approx. 4,800 Hours and approx. 4,300 Compressor Hours. Includes 1,200' of Drill Pipe that is about 3 Years Old and in Excellent Condition. Truck has approx. 40,000 Miles on it. RIG HAS BEEN SOLD
Sold - SRS #4193
DESCRIPTION: AMS Sonic; Model: CRS-17-C; Engine: PTO; Mounted On: Rubber Tracks; Condition: SOLD; Tools/Options: AMS Sonic CRS-17-C: SOLD 22,000 - 28,000# Oscillator Output Force, 0-150 c/s Frequency, 1,475 ft.-lbs. Sonic Rotary Motor Torque, 13,000# Maximum Retract, 7.000# Maximum Pulldown, 205 ft/sec Head Travel Speed. Unit Weighs approx. 12,000# and is 84" Wide. SOLD
Sold - SRS #4111
DESCRIPTION: Water Truck; Mounted On: 2000 Sterling; Truck Engine Make: CAT C12 350 HP; Condition: SOLD; Tools/Options: SOLD 2,000 Gallon Water Tank, Bed Measures 96" X 20'5" with Tool Boxes on the Front and Underneath. No Hydraulic PTO or Pump. No Crane but It has a Crane Mount for an Electric one. Truck has approx. 635,000 Miles on it, 52,000# GVWR, Jake Brake, 10-Speed Transmission, Axle Lock, Air Ride with Dump Valve, Cruise and AC.
Sold - SRS #3587
DESCRIPTION: 1999, Ingersoll Rand; Model: T4W Deep Hole Package ; Compressor: IR 1250/350 HR2.5; Engine: Cummins QSK; Mounted On: Crane Carrier; Truck Engine Make: CAT 3306 300 HP; Condition: SOLD; Tools/Options: Ingersoll Rand T4W Deep Hole Package Year: 1999: SOLD 700 HP Deck Engine, Current Hour Meter Reads 13,645. 4SF 2-10 High Torque Rotary Head, Deep Hole Package with Regen and 70,000# Pullback, 7-Gallon Electric Lubricator, 18 GPM Water Injection Pump, Pre-Heater, 4-1/2" X 21' 2-7/8" IF Starter Pipe, Runs 4-1/2" X 25' 2-7/8" IF Drill Pipe, 4-1/2" Hex Fork Chuck, 2-7/8" IF Dresser Rod, 4" J-Wrench, Two Half Bushings Centralized Bushings, Bit Detaching Chuck 6-1/5" Bits, Adapter for Bit Detaching Chuck, Booster A. R. Piping with check Valve for 600 PSI. Carrier Currently has 64,673 Miles on it. Recently Painted in 2017. SOLD
Parts Tooling - SRS #4185
DESCRIPTION: Versa Drill; Model: Carousel; Tools/Options: Versa Drill V-100 Carousel. Includes, Fork, Table Bushings, 10 Rods and Carousel and the 3.5" Drill Rod from the Head..
Sold - SRS #4175
DESCRIPTION: 1998, Ingersoll Rand; Model: TH-60; Compressor: None; Mud Pump: 5X8; Engine: PTO; Mounted On: IHC Paystar 5000; Truck Engine Make: Cummins N14 455 HP; Condition: SOLD; Tools/Options: Ingersoll Rand TH-60 Year: 1998: Four Motor Spur Gear Tophead Drive. Spicer 784 Air Shift PTO, 38' Mast with 29,500# Pullback Capacity, Braden Main Winch, High-Speed Winch. 9-Rod Carousel, Two Jacks Behind the Cab and Two Rear Jacks, Driller and Operator Platforms, Rod Box. No Rod Available. SOLD
Sold - SRS #4184
DESCRIPTION: 1999, Drilltech; Model: D25 KW; Compressor: Sullair 1000/350; Mounted On: Ford Sterling; Condition: SOLD; Tools/Options: Drilltech D25 KW Year: 1999: 2023 Remanufactured Compressor, - needs rebuilt. Low Miles on Truck. Engine Hour Meter Reads 5,819. New Bull Shaft, Gears and Bearings in 2022. SOLD
Sold - SRS #4181
DESCRIPTION: Water Truck; Mounted On: 2007 Peterbilt; Truck Engine Make: Cummins 330 HP ISC 285, 8.3L, Straight 6; Condition: SOLD; Tools/Options: SOLD 2,500 Gallon (brand new never used) Gordon Ballard Water Tank, 150 Gallon Fuel Tank with Pump. Truck has an Allison Automatic Transmission, Double Frame and approx. 80,000 Miles. 60,000# GVW, 16,000# Front Axle and 22,000# Rears. Service Records available upon Request. Strong Truck. Condition: Good
Sold - SRS #4155
DESCRIPTION: 2016, Atlas Copco; Model: TH-60; Compressor: 1070/350; Mud Pump: Plumbed - See Below; Engine: PTO; Mounted On: 2016 Peterbilt 367 Tridem; Truck Engine Make: Cummins 1SX 600 HP 2010 Emissions; Condition: SOLD; Tools/Options: Atlas Copco TH-60 Year: 2016: SOLD Overall Length with Mast Down is 40'. 36' Mast with 40K Pullback and 25K Pulldown, 8000 ft/lb. @ 105 rpm, 5,500 ft/lb. @ 145 rpm. 2-Speed Top Drive, 3.5" X 2-3/" IF Spindle, 7-Rod Carousel, 3" - 350 PSI Air Piping, 25 GMP Bean Water Injection (without foam), 18,000# Winch and a 3,900# Auxiliary Winch, No Free Fall, Off Board Mud Package Includes Controls, Gauge & Standpipe & Quick Connect Manifold. Does not Include Mud Pump or Motor to Drive Off Board Mud Pump. Standard Drillers Platform. 2010 Emissions Engine, 22,000# Front Axle, 46,000# HMX Rear Axles, 246" Wheel Base, Driver Controlled Differential Lock, Fuller Transmission, Fabco Transfer Case, Chrome Sunvisor, Bumper, Exhaust, Aluminum Wheels, Heated Mirrors, Passenger Side Motorized Mirror, CD Player. Compressor Hour Meter Reads 1,250, Odometer Reads 3,676 Hours, Rig Hour Meter Reads 1,554. Hub Meter Reads 30,930 Miles. Rig Currently has a 4.5" Carousel on it, Rod Box was Removed for Boxes on Deck. No Pipe Spinner. Rod Box and 3.5" Carousel Available. No Drill Pipe Available
Sold - SRS #4157
DESCRIPTION: 2007, Drillmax; Model: 250; Compressor: Developmental; Mud Pump: Gardner Denver 4.5" X 5"; Engine: PTO; Mounted On: 2018 Ford F-550; Truck Engine Make: 6.7 L Power Stroke; Condition: SOLD; Tools/Options: Drillmax 250 Year: 2007: SOLD Rod Rack, Single Rod Loader, Hydraulic Breakout Wrench, Hydraulic Oil Cooler, Extendable Jib, Helper Controls for Winch and Jib. Under 26,000# GVWR, No CDL. Truck has 21,000 Miles on it. Includes 400' of 2-3/8" O.D. 2" (I.D.) IF Rods, 20' Lengths. SOLD
Sold - SRS #4152
DESCRIPTION: 2006, Versa Drill; Model: V-100; Compressor: IR 300/200; Mud Pump: 4X3; Engine: PTO; Mounted On: 2006 Navistar 7400 6X6; Truck Engine Make: DT 466; Condition: SOLD; Tools/Options: Versa Drill V-100 Year: 2006: SOLD 34' Mast with 26' Head Travel and is Rated at 55,000#. 40,000# Pullback, 22,100# Pulldown. 2-Speed Tophead with 2-1/2" Bore Hole, Twin Fold up Platforms, (4) 36" Hydraulic Leveling Jacks, Table has a Swing out Rear Section and Retracting Front Section with Dual Cylinder and 10" Retract Capability. Hydraulic Rotating Carousel set up for (10) Pieces of 3-1/2" X 20' Drill Rod, Pipe Rack holds 15 Pieces of Drill Pipe, Includes Rod Slide. 12,000# Capacity (bare drum) Main Hydraulic Winch with Jib - Swing & Extend, 2,000# Auxiliary Winch with Swinging Jib and Lights. Newer Mud System and Piping, 9 GPM Water Injection. (3) Tool Boxes, (3) Halogen Lights Mounted on Derrick and Console, Hammer Holder. New Carousel and Drill Rod in 2020, Newer Mud System and Piping, Mid 2022 Transfer Case, Rotation Pump, A10 Pump and New Charge Pump Installed. Late 2022 Rig had all New Injectors and Injector Wiring Harness, 70 Gallons of New AW32 Hydraulic Fluid, All New Air Compressor Filters, New Hydraulic Filters in the Hydraulic Tank, All Fluid has been Changed in both Rear Ends, New Fluid in the Transmission and New Oil Change and Fuel Filter. 2023 New Fan Clutch and Fan Clutch Solenoid, New Dog Box for Inside Cab, New Rotation Hydraulic Lever, New Tophead Slide Bushings. Truck has a 12-Speed Spicer Transmission, 300 HP @ 2,000 rpm Engine, 14,000# Front Axle, Rockwell 40,000# Rears, Driver Controlled Main Locking Differentials. GVWR 54,000#, Odometer Reads 68,801 Miles and 10,950 Hours. Maintenance record available upon request. Rig was Gone Through and had the Hydraulic Hoses Replaced a Few Years Ago. Been Well Maintained Since. New Front Steer Tires. Includes 200' of 3.5" Drill Rod, Mud Pit and Thimble.. Condition: Working Daily SOLD
Auger - SRS #4182
DESCRIPTION: 2006, Diedrich; Model: D50; Engine: PTO; Mounted On: Tracks; Truck Engine Make: John Deere 4-Cylinder; Condition: Working Daily; Tools/Options: Diedrich D50 Year: 2006: Refurbished in 2017. Currently has Approx. 6,000 Hours. 3 Winches, Auto Hammer, 3L6 Moyno Pump. New Power View Modul, New Computer on the John Deere Engine, One New Track (installed Jan 2023), Remote is 3 years old (2020), Drill Runs Good, Utilized Daily.
Sold - SRS #4179
DESCRIPTION: 2004, Decontamination Trailer; Mounted On: Enclosed - Advanced Mfg.; Condition: SOLD; Tools/Options: 2004 ACSI Govt. Issued Decontamination Trailer. Includes Propane Generator, Hot Water System, Awning, Decontamination Shower, External Wash. Advanced Trailer Mfg. 14,000# Tandem Enclosed Trailer. Shows 21 Training Hours. SOLD
Sold - SRS #4178
DESCRIPTION: 2008, Geo-Loop; Model: 50-500; Engine: NEW Honda GX 690; Mounted On: Frame; Condition: SOLD; Tools/Options: Geo-Loop 50-500 Year: 2008: NEW Honda Engine. Some Spare Parts, Hose Reel and 300' of 1" Pipe Included. SOLD
Sold - SRS #4143
DESCRIPTION: 1999, GEFCO; Model: 30K; Compressor: Sullair 1000/350; Mud Pump: 4X3X13 Centrifugal; Engine: PTO; Mounted On: 1998 Peterbilt 357 6X4; Truck Engine Make: CAT 3406 550 HP; Condition: SOLD; Tools/Options: GEFCO 30K Year: 1999: SOLD Engine has been Tuned up to 550 HP. Recent Upgrades Include: Air Compressor Clutch, Seals in Head, New Bean Pump Head, New Shock Sub, New Oil Cooler, Hoses, Remanufactured Compressor, Filters and Oil, New Air Regulators, etc., Thermostat, Hoses, Alternator, Tac, New Winchline, etc., Hammer Oil Injection Pump and most Recently Replaced #1 Injector & Programmed all. Includes Hand Tools and Rod the Rig Carries. 20,000# Front Axle and 46,000# Rears. One 60 Gallon Plus One 135 Gallon Aluminum Fuel Tanks. Hour Meter Reads 6,089 Total Hours. Odometer Reads 486,729 Miles and 6,099.5 Hours. Hub Miles Reads 55,713. 401.9 Hours on Compressor since Remanufactured. SOLD
Sold - SRS #4090
DESCRIPTION: Geo-Loop; Model: 50-500; Engine: Honda Gas; Mounted On: Frame; Condition: SOLD; Tools/Options: Geo-Loop 50-500 : Hose Reel and Pipe Included. Year Unknown, Believed to be Early 2000's, - 2004. SOLD
Sold - SRS #2729
DESCRIPTION: 2008, HTB; Model: 2500; Compressor: N/A; Mud Pump: See Below; Engine: 165 HP 6-Cylinder John Deere Diesel; Mounted On: Trailer; Truck Engine Make: N/A; Condition: SOLD; Tools/Options: HTB 2500 Year: 2008: SOLD Double Drums/Double Brake Banks on each Drum, Has Triple 16" HC Clutches with 18" Air Bags over the Plates. HT 12" Retractable Rotary Table, 55' Free Standing HTB Derrick, Rig is on 4-Lines and has been Pull Tested at 80,000#. Diesel Engine with 4-Speed Transmission. Rotary has a 5-Speed Transmission, 4 Leveling Jacks (8"X36), Spinning Chain, Hydraulic Wireline Unit and Counter (Halliburton), Near New 3" HD DSM Swivel on Tracks, Track Run by Air. All 3" Plumbing with Oilfield Hoses, Small Sub, Mats, 140 bbl. Mud System with Shaker and Desander Cones, 150 kW CAT Generator and Controls, 10,000 Gallon Water Tank with Water System, (2) Continental Emsco D-375 Pumps with 500 HP CAT Engines, Air Clutches, Guards, Rod Oilers. 3,500' of 3.5" IF Drill Pipe and (6) 6" Collars. Drill Pipe Handler that is on a Float, Carries 55 Joints of Pipe and (2) Drill Collars. Hydraulically Run, Plugs into Rig. Doghouse and Fuel Tank Mounted on Float, Living Quarters for Crew with 6 kW Generator and Water & Sewer System.. Condition:
Sold - SRS #4170
DESCRIPTION: Smeal; Model: 10T; Engine: PTO; Mounted On: 1989 IHC S1700; Truck Engine Make: 6-Dylinder Diesel; Condition: SOLD; Tools/Options: Smeal 10T: Hydraulic Power to Rear, Utility Bed, Standard Length Mast. Main Line and Sand Line. 26,000# GVW, Originally was a U-Haul Truck. Approx. 234,000 Miles. SOLD
Sold - SRS #3875
DESCRIPTION: 2015/16, Smeal ; Model: 6T; Engine: PTO; Mounted On: 2015/16 Dodge Ram 5500 4X4; Truck Engine Make: Cummins Diesel; Condition: SOLD; Tools/Options: Smeal 6T Year: 2015/16: SOLD. Utility box, Extended Jacks, Non-Wireless Remote, Sandline with Free-Fall. Rust Free, approx. 74,000 Miles.
Rotary P-Q - SRS #2802
DESCRIPTION: 1979, Portadrill; Model: 524; Compressor: 256 LeRoi; Mud Pump: 5-1/2" X 8 Gardner Denver; Engine: PTO; Mounted On: 1979 International Paystar 5000; Condition: CURRENTLY OFF MARKET - PUT BACK IN USE; Tools/Options: Portadrill 524: 5 Leveling Jacks, 7-1/2" Retractable Rotary Table, 26' Kelly, 3 Line Machine (Sand Line & Kelly), 2" Little Giant Swivel, Racking Board. No Rod Included. Ready to Drill.
Sold - SRS #4176
DESCRIPTION: 1991, Ingersoll Rand; Model: T4W; Compressor: IR HR2 1050/350; Engine: Cummins KTA 19C; Mounted On: 1990 CCC; Truck Engine Make: Cummins LTA10; Condition: SOLD; Tools/Options: Ingersoll Rand T4W Year: 1991: Deck Engine was Replaced in 2004, approx. 5,000 Hours. 70K Pullback, 30K Pulldown, Spur Gear Head, 7-Rod Carousel with Additional 4-Rod Carousel. Rig is Set Up to Run 4.5" O.D. X 25' Pipe. 3 Hydraulic Jacks, 2 Winches, Water Injection Pump with Water Tank, Hammer Oiler, Double Fuel Tank, Pre Heater. Carrier has approx. 12,700 Miles. 300' of Pipe Included.
Sold - SRS #3183
DESCRIPTION: Mayhew ; Model: 500; Compressor: GD Developmental; Mud Pump: GD 5X6; Engine: PTO; Mounted On: 1998 Volvo; Truck Engine Make: Cummins M11; Tires: Good; Condition: SOLD; Tools/Options: Mayhew 500: Air Engaged Mud Pump, 5-1/2" Retractable Table, 30' Mast, 28' Kelly Bar, Mechanical Clutches, 3- Drums (Kelly, Hoist Line and Sand Line), Tool Boxes, Drillers Platform, Rod Rack, Front & Rear Hydraulic Jacks,. Includes approx. 390' of 2-7/8" X 15' Mayhew Regular Drill Rod, Mud Pan can also be Included. Working Drill. Truck has a Fuller Transmission and approx 37,443 Miles on it. Truck has Full Lockers. SOLD
Sold - SRS #4127
DESCRIPTION: Failing; Model: CF-15; Compressor: LeRoi 256 SDS 2-Stage; Mud Pump: Failing 4-1/2" X 6" Rebuilt Fluid End; Mounted On: 1977 Paystar IHC; Truck Engine Make: Cummins Big Cam 400; Condition: SOLD; Tools/Options: Failing CF-15: Mast Rated at 40,000#, Air Clutches on Drawworks and Compressor. Fluid End on Mud Pump was Rebuilt (one well since), New 4-Cylinder Bean Pump, New DSM Pulldown Gears, Mayhew Rotary Table with Hydraulic Retract, Knowledge Box. Drawworks Air Clutches are Recently Rebuilt (bladders, plates and new Deublin Rotation Unions on Drawworks. Auxiliary Sandline with Manual Clutch that is off Rig but all Clutch Levers, etc. are on Rig. Had to remove sand drum to pick up Drawworks out of rig for clutch replacement, not on rig but included. Rig came with a 3rd drum as a sandline. Has an auxiliary transmission inline to slow unit down for air hammer drilling plus rotary transmission mounted to manual clutch plate for rotary operation with controls at drillers stand. Rig Weighs 51,040#, Steer Axle: 15,760#, Drive Axle: 35,280#. Includes: 400’ of 3.5" OD Drill Pipe with 2-3/8" IF Connections, Subs, 2-drill collars, Bit sub., 12-1/4” spud bit 7-7/8” bit x-over subs. Home Made Mud System and Trailer available for an Extra Cost.
Sold - SRS #3933
DESCRIPTION: 1977, Portadrill; Model: RVT Reverse Circulation; Compressor: Plumbed; Mud Pump: 3X4 Centrifugal; Engine: PTO; Mounted On: 1977 Ford LT-8000; Truck Engine Make: CAT 3208; Condition: SOLD; Tools/Options: Portadrill RVT Reverse Circulation: Hoisting Line Assembly 9/16" X 190', 10" Kelly Line Block, Kelly Line Assembly - 5/8" Cable, Kelly Bushing. 3-Part Line, 6" Swivel, 18' Kelly, Table Opening 42", 42' Derrick 48" Front Jack Stroke, 24" Rear Jack Stroke. 500' of Drill Pipe (6" I.D. X 15', and four 10' sections) and Bits Can be Included for an Extra Cost. Truck has a 13-Speed Transmission, 2-Speed Auxiliary Transmission with Power Take-Off. 12,000# Front Axle Capacity, 34,000# Rears, Air Brakes. SOLD
Sold - SRS #4169
DESCRIPTION: 2003, Driltech; Model: T25KW; Compressor: 900/350; Engine: CAT C15 450 HP; Mounted On: Sterling; Truck Engine Make: 410 HP Mercedes; Condition: SOLD; Tools/Options: Drilltech T25KW Year: 2003: 7,900 Original Hours, Deck Engine was Rebuilt 800 Hours ago. Bean Water Pump, Air Lubricator. Nice Condition, Ready to Work. Includes 440' of 4.5" Drill Pipe, Two 6" Hammers and 8" Hammer, all Operating Tools. Truck has Locking Rears and approx. 28,000 Miles, Hour Meter Reads 22,006. SOLD
Sold - SRS #4144
DESCRIPTION: 1998, Pulstar; Model: P12; Engine: PTO; Mounted On: 2004 IHC 4300 4X2; Truck Engine Make: DT 466 250 HP; Condition: SOLD; Tools/Options: Pulstar P12 Year: 1998: Well Maintained Unit, One Owner. 37' Mast, 3-Line Machine, 6K Single Pull, 12K Double Pull Mainline, Sandline (no freefall), Tailout Winch. Two Pipe Racks, Hydraulic Power to Rear, Walking Beam, Wired Remote, Reading Body, Truck has Air Brakes and approx. 198,000 Miles on it. SOLD
Sold - SRS #4126
DESCRIPTION: 2007, Atlas Copco; Model: T3W; Compressor: 1070/350 IR; Mud Pump: Plumbed; Engine: CAT C15 575 HP; Mounted On: 2006 IHC 7600i 6X4; Truck Engine Make: CAT C13 380 HP; Condition: SOLD; Tools/Options: Atlas Copco T3W Year: 2007: SALE PENDING 40,000# Pullback, 36' Derrick, In-Out Box to Disengage the Compressor. 8,000 Ft-lbs. @ 105 RPM 2-Speed Rotary Head and 5,500 ft-lbs. @ 145 RPM, 18,000# Main Winch, Sandline that is set up for 5/16" Cable, 18 GPM Bean Water Injection, 7 Gallon DHD Lubricator, Pro-Heat, Single Rod Loader, Pipe Spinner. Rig is Set Up for 4.5" X 20' Flush Joint Pipe with 3.5" API Regular Tool Joints. Truck has Deluxe Interior, 20K Front Axle and 46K Rears, Diff. Lock on both Rear Axles, Fuller 10-Speed Transmission. Truck has approx. 39,759 Miles and 8,225 Hours. Regular Maintenance Performed, Repair History Available. No drill rod is included but some is available for an extra cost. SOLD
Rotary H-I - SRS #4167
DESCRIPTION: Hilyard; Model: Super Buggy; Compressor: 427 2-Stage Belt Drive Water Cooled; Mud Pump: Gardner Denver 5X6; Engine: PTO; Mounted On: Hilyard Buggy; Truck Engine Make: 671 Detroit - Low Hours; Tires: Like New; Condition: Needs Some Hydraulic Hoses; Tools/Options: Hilyard Super Buggy: Low Hours On Detroit, Water Cooled Compressor, Hilyard Tophead Drive, Bean Injection Pump, Ramsey Pulling Winch, Ramsey Pulldown Winch. Needs some Hydraulic Hoses. New Starter and Battery.
Rotary A-B - SRS #4166
DESCRIPTION: Ardco; Model: Air Buggy; Compressor: Leroi 100S2 Belt Drive; Engine: PTO; Mounted On: Ardco Buggy; Truck Engine Make: 6V92 Detroit; Condition: Runs & Drives; Tools/Options: Ardco Air Buggy: Low Hours on Detroit. Ramsey 700 Front Pulling Winch, Ramsey Pulldown Winch, Ardco Tophead Drive. New Battery. Drill would be great for 3" - 5" holes and can run a hammer real well. Motor is like new. Drill is set up to run 10' Mayhew Jr. drill rod.
Auger - SRS #4165
DESCRIPTION: Highway; Model: HM-38; Engine: John Deere 115 HP Diesel; Mounted On: 1998 Ford FT 900; Truck Engine Make: Cummins C8.3L Diesel; Tires: Good; Condition: Fair - Runs Well; Tools/Options: Highway HM-38 : Mechanical Driven System, 52,513 ft./lbs. Maximum Rotary Torque, 0-233 RPM Variable Speed, 3" Solid Kelly, 35,400# Maximum Kelly Bar Crowd Force, 22,900# Maximum Retract Force, Digging Depths up 25', 72" Diameter Auger Capacity, 240° Turntable Base, 36" Mainframe Travel, Rear Outriggers. 14,500# Base Unit. Recently Serviced, Includes 1X30" Drill Bit, 1X30" Core Bit, 1X24" Drill Bit.
Sold - SRS #4163
DESCRIPTION: Mud Pump: Gardner Denver 7-1/2" X 10" Duplex; Mounted On: Unmounted; Tools/Options: Gardner Denver FXD (FY-FXD) Hydraulically Driven. SOLD Includes New Rods, Pistons and Cylinders. SOLD
Sold - SRS #4162
DESCRIPTION: Cyclone; Model: 35; Mounted On: Unmounted; Condition: SOLD; Tools/Options: Cyclone 35: Lots of Rebuilds but needs put back together. New Jackshaft, Clutches.
Sold - SRS #4160
DESCRIPTION: Bucyrus Erie; Model: 60L; Mounted On: Trailer; Truck Engine Make: CAT Diesel; Tools/Options: Bucyrus Erie 60L: Casing Strut. Condition of Cable Unknown, Ready to Drill other than that..
Sold - SRS #4158
DESCRIPTION: Gardner Denver - Mayhew; Model: 1000; Compressor: None; Mud Pump: 5X6 - Rebuilt; Engine: PTO; Mounted On: 2009 Peterbilt 340; Truck Engine Make: Cummins 330 HP PX-8; Tires: Good; Condition: SOLD; Tools/Options: Gardner Denver 1000: SOLD Stationary Table, Mechanical Clutches, Chain Pulldowns. New Suction Hose, Mud Pump Fluid End and Mechanical End has been Reworked. Includes approx. 380' - 400' of Drill Pipe, Multiple 8" and 10" Blade and Roller Bits. Working Drill. Truck is Heavy Spec and Double Framed. SOLD
Sold - SRS #4150
DESCRIPTION: 2007, Versa-Drill; Model: V-1555; Compressor: 900/350; Mud Pump: 3X4; Engine: PTO; Mounted On: Peterbilt; Truck Engine Make: Cummins ISM 550 HP; Tires: Good, New Front Steer Tires; Condition: SOLD; Tools/Options: Versa Drill V-1555 Year: 2007 SOLD 55,000# Pullback, Water Injection, Foam Injection, Hammer Oiler, Auxiliary Hydraulics for Mud Cleaning System, Rod Spinner, 16,000# Winch Line. Carousel hold 200' of 4.5" Pipe and the Rod Box holds 300' of Pipe. All New Main Hydraulic Pumps, A lot of Recent Maintenance, Rust Free and in Nice Shape. Drill is set up to Run 4.5" Drill Pipe. Tires in Great Condition, it has New Front Steer Tires. Doesn't use Oil, Clean Exhaust even Running Cold. Everything works as it should. Approx. 8,700 Hours. Pre-emission Cummins, 13-Speed. Includes 620' of 4.5" Drill Rod. Weighs approx. 59,000# with Rod. SOLD
Sold - SRS #4146
DESCRIPTION: Mud Pump: Gardner Denver 5X6; Mounted On: Unmounted; Tools/Options: Gardner Denver 5X6: Recently Removed from Drill, Worked Good. Rebuilt Fluid End in the Spring of 2022, Gear End is in Good Condition. Has the Hydraulic Motor and Gear Reduction.
Sold - SRS #4125
DESCRIPTION: 2002, Ingersoll Rand; Model: T3W; Compressor: 900/350; Mud Pump: Plumbed; Engine: CAT 3406; Mounted On: IHC; Truck Engine Make: CAT C12; Condition: SOLD; Tools/Options: Ingersoll Rand T3W Year: 2002 : SOLD Mud Pump Not Included. Truck has approx. 34,639 Miles on it, 6,556 Hours. No rod included but some is available for an extra cost. SOLD
Sold - SRS #4156
DESCRIPTION: E-Z Bore; Model: Swinger 45; Engine: PTO; Mounted On: 1990 Ford F Series; Truck Engine Make: 7.3L Diesel; Condition: SOLD; Tools/Options: EZ Bore Swinger 45: Sandline, Tool Boxes, Two Front and Two Rear Jacks. Odometer Reads 73,640 Miles, Stored Inside all its Life. New Tires, Brakes and Rotors. Well Maintained Unit. SOLD
Auger - SRS #4102
DESCRIPTION: 1990, CME; Model: 75; Engine: PTO; Mounted On: 1992 Morooka MST 1500; Truck Engine Make: Cummins 6-Cylinder Diesel; Condition: PRICE REDUCED; Tools/Options: CME 75 Year: 1990: 1,771 Hours, High Torque Rotary Drive, Front Auger Rack, (4) Winches (7,000#, 3,200#, 1,800# and wireline), 3L8 Moyno Water Pump, Water Swivel, 140# Auto Hammer, Rod Holder and Breakout Wrench, Stainless Steel Water Tank & Tool Boxes, Slide Base, in-out and Side to Side, (3) Hydraulic Jacks. Carrier has 4,992 Miles
Sold - SRS #4154
DESCRIPTION: 1995, Ingersoll Rand; Model: TH-60; Compressor: 750/350; Mud Pump: 13X3X4 - Newer; Engine: PTO; Mounted On: IHC Paystar; Truck Engine Make: Cummins N14; Condition: SOLD; Tools/Options: Ingersoll Rand TH-60 Year: 1995: Rig is Set Up to Run 3.5" Drill Pipe, 9-Rod Carousel and Rod Box, 16,000# Main Winch and a 2,000# Sandline, 30K Pullback, Two Front and Two Rear Jacks, Driller & Operator Platforms, Catwalks. Rig Hours Show 6,747 but Hour Meter has been Changed and Actual Total Hours are Unknown. Well Maintained, Newer Mud Pump, Newer Spicer Drop Box Transfer Case, Rebuilt most Hydraulic Cylinders, Top Drive Motors, Derrick Cylinders, Top Drive Feed Cylinder, etc. Webasto Heater. All Oils Changed Regularly, Ready to Work. Truck Currently has 82,372 Miles on it. No Pipe or Tooling Available. SOLD
Sold - SRS #4113
DESCRIPTION: 1991, Ingersoll Rand; Model: T4W; Compressor: 1050/350 HR 2.5 Screw; Mud Pump: None; Engine: Cummins QSKT19 750 HP 4,700 Hours; Mounted On: 1991 CCC; Truck Engine Make: 285 HP Big Cam Cummins; Condition: SOLD; Tools/Options: Ingersoll Rand T4W: SOLD 70,000# Pullback Capacity, 40,000# Pulldown, New Compressor in 2020, 750 HP Deck Engine with 4,800 Hours (replaced in early 2000's, few hours since). 24" Maximum Opening, Dual Carousels - 7 Swing Open, 4 Fixed Alongside it. Hammer Oiler and a New CAT Triplex Injection Pump. Includes approx. 900' of 4.5" OD X 25' Drill Pipe with 2,-7/8" IF Threads. Also Available for an Extra Cost is a 2013 Freightliner M2 Rig Tender with 24' Bed, 350 Gallon Diesel Tank with 50' Hose, Truck Currently has 180,000 Miles on it. SOLD
Sold - SRS #4076
DESCRIPTION: 2006, Sullair; Model: 900XHH/1150XH; Compressor: Sullair 900XHH/1150XH; Engine: CAT C15 525 HP; Mounted On: 1985 GMC; Truck Engine Make: Detroit; Condition: SOLD; Tools/Options: Year: 2006: Truck has approx. 49,000 Miles on it. Compressor Delivers 900 CFM @ 500 psi or 1150 CFM @ 350 psi. Unit had been used as an open hole notch truck. Compressor has approx. 11,000 Hours on it. Approx. 500 Hours since Rebuild. UNIT HAS BEEN SOLD
Rotary E-F - SRS #3821
DESCRIPTION: Failing; Model: JED A; Compressor: IR 375/150; Engine: 6-Cylinder John Deere; Mounted On: Single Axle Trailer; Condition: OFF MARKET; Tools/Options: Failing JED-A: Jed A Reverse Circulation Rig. OFF MARKET Double Drum, Flip up 18" Rotary Table, 48" Opening, Cathead, No Sandline, 6-Part Kelly Line, 5-Part Trip Line. 6" Western Rubber Reverse Circulation Swivel with 24' Flanged Kelly Bar. John Deere Tier 4 Deck Engine with approx. 3,800 Hours. Onboard IR Screw Air Compressor. Been Down 1,650' with it. Set Up to Run 6" Flanged Pipe 20' Lengths, No Pipe Available. Piping on air Runs Through the Middle not the Outside. OFF MARKET
Sold - SRS #4140
DESCRIPTION: Water Bed; Mounted On: Unmounted; Condition: SOLD; Tools/Options: SOLD Unmounted 2,000 Gallon Water Bed.
Sold - SRS #3937
DESCRIPTION: 2007, Drilltech Sandvik; Model: T25KW; Compressor: Sullair 1000/500 Rebuilt & Upgraded to 500 Stage in 2021; Engine: CAT C-15 Tier III; Mounted On: 2007 Sterling 9513; Truck Engine Make: Mercedes 370 HP MBE 4000; Condition: SOLD; Tools/Options: Sandvik T25K5W Year: 2007: SOLD Approx. 1,000 Hours on Rebuilt Compressor and approx. 9,400 Engine Hours. Dual Air Intake System on Compressor, Tier III Deck Engine with Fuel Cooler, 540 HP @ 1800 RPM. 89 RPM High Torque Head 72,600 Lbs. Torque, 20,500# Pulldown, 30,000# Pullback, 172° Swinging Jib Boom, 8,000# Hydraulic Winch with 120' Non-rotating Wire Rope, Heavy Duty 1-3/4" Feed Chain Group with Timing Sprockets, External Drill Pipe Loader for 3-1/2" OD X 20' Long Pipe and a Pipe Trough for 3.5" X 20' Drill Pipe. Stabilizer Storage Trough & Dual Hammer Holders, Remote Helpers Station for Independent Control of Winch, Jib Swing and Extension, Compressor Airline Blowdown, 20 GPM Water Injection, Blue White Foam Injection Group, Electric Air Line Lubricator for DTH Hammers Including a 10 Gallon Reservoir. Two 48" Front Jacks, Two 36" Rear Jacks. Foldup Walkways and Platforms, 48" Jaw Wrench with Supports, Auxiliary Air Line under Rod Box, Night Lighting, Remote Fluid Drains, 240 Gallon Fuel Tank, Lockable Tool Box, 8-Speed Eaton Transmission, 20,000# Front Axle, 46,000# Rear Axles, Jake Brake. Truck has approx. 27K Miles. Includes Accessory Kit Consisting of Lift Plug, Top Sub, Table Bushing, (3) Split Bushings, Petol Tong, Chain, Pipe Pickup Sling, Bit Breaker and 1,40' of 3.5" OD Drill Rod (560' was purchased new in 2021). Service Records, Parts & Owners Manuals also Included.
Sold - SRS #4145
DESCRIPTION: 1979, Gardner Denver; Model: 1000; Compressor: GD 657; Mud Pump: GD 5X6; Engine: PTO; Mounted On: 1979 Ford 9000; Truck Engine Make: CAT; Condition: SOLD; Tools/Options: Gardner Denver 10000 Year: 1979: SOLD Drill was Recently Refurbished, Truck Needs Work. Recently Rebuilt Fluid and Gear End on Mud Pump, CAT Diesel has been Remanufactured, Installed approx. 6 Years Ago. 4 Jacks, Sliding Table, Air Clutch Drawworks, all Clutches have been gone through and Rebuilt, New Plates, Springs and Brass, 2 New Pulldown Bearings Replaced, All Fluids Changed, New Control Levers and Rebuilt all Linkages, New Driveline and a Used Hydraulic Motor Recently Installed. Good Running Rig, Compressor Oil Recently Changed, Good Pressure. Truck needs work, either needs replaced or totally gone through, engine is good but truck has steering issues. Includes 400' of Drill Pipe. Round Tank Water Truck is also Available for an Extra Cost. Receipts for work done available upon request. SOLD
|
Southern Office: 1485 DeSoto Blvd N Naples FL 34120 Phone: 239.774.1939 |
Northern Office: Oil City PA 16301 Phone Toll FREE: 1.888.204.3907 |