Rigs
Sold - SRS #4281
DESCRIPTION: 1994, CME; Model: 750; Engine: PTO; Mounted On: ATV; Truck Engine Make: Cummins 5.9C; Condition: SOLD; Tools/Options: CME 750 Year: 1994 SOLD Mast Rated for 13,500#, Tophead Rated at 30,000 ft.-lbs. Pullback and 20,000 ft.-lbs. Pulldown. Moyno Pump, Breakout Wrench, 140# Hydraulic Hammer, Cathead (Forward 4,100#, Reverse 5,200#) 15K Front Winch, 1,800# Passenger Winch, 3,200# Driller's Winch, 8,500# Deck Winch (large winch, uses 1/2" Cable, 65' long with an open socket soldered on one end). Hobbs Meter Reads 5,379. 72 (360') 4-1/4" Hollow Stem Augers Available for an Extra Cost. Acker Brand, Very Little Use.
Sold - SRS #4199
DESCRIPTION: 2022, Derex; Model: 1340 Dual Rotary; Compressor: Available - None on Board (plumbed - to be confirmed); Mud Pump: Plumbed (to be confirmed); Engine: PTO; Mounted On: 2022 Peterbilt Single Axle; Truck Engine Make: Cummins 6.7L; Condition: SOLD; Tools/Options: Derex 1340 DR Year 2022: SOLD Dual Rotary, Single Axle Truck, 13' Stroke, Top Drive Speed up to 120'/minute, 40K Pullback, 20K Pulldown. 42,000 in/lbs. Torque (stall), 0-140 RPM Top Drive Rotation Speed, 180,000 in./lbs. Lower Drive Torque, 0-24 RPM Lower Drive Rotation Speed. Capable of 5", 6", 8" and 10" Casing. 2,500# Winch, Rod Box Capable of Holding 500' of 3" NWJ Rod, 8 GPM Water Injection. Owner will confirm but believes it is plumbed for mud & air. Truck has a 6-Speed Allison Automatic Transmission, 33,000# GVW, and approx. 1,307 Miles. Includes 700' of 3" NWJ Drill Rod, 250 amp Miller Wire Feeder. A 2005 Sterling with a 1998 IR XHP 750/300 Compressor Truck is Available for an Extra Cost, Truck has approx. 130,000 Miles on it.
Sold - SRS #4328
DESCRIPTION: 2021, Elgin Mud System; Model: Kemtron 400 HD2 ; Mounted On: Tanden Axle Trailer with Pintle Hitch; Condition: SOLD; Tools/Options: 2021 Elgin Kemtron 400 HD2: SOLD Low Hours (approx. 3,000). 2,400 Gallon Tank Capacity (1100 Gallon dirty tank & 1300 gallon clean tank), 250 3X2 Centrifugal Pump with 20 HP Motor for each: desliter, Mud gun/mud hopper, transfer, boost/transfer. (1) four panel double deck Tango Shaker with 2 HP Vibrator Motors, Six 4" Cone Desilter Assemble with Isolating Valves, (4) High Pressure Mud Guns with 2" X 5/8" Bore, 3" Mud Hopper, Nema 4X Control Panel, 60 kW Generator, Osha Compliant Handrails & Gratings. Connections: 4" Inlet, 4" Tank Drains, 8" Clean Tank Overflow, 3" Transfer. Pintle Hitch on Trailer, 12,000# Independent Jack. 22,000# Dry Weight. SOLD
Sold - SRS #4327
DESCRIPTION: Speedstar; Model: SS-22; Engine: PTO; Mounted On: 2007 Kenworth T-800; Truck Engine Make: 350 HP Cummins; Tires: Good; Condition: SOLD; Tools/Options: Speedstar SS-22: SOLD Lots of Rebuilds and New Components. 3" Swivel, Recently Rebuilt 10" GEFCO/Speedstar Retractable Table with 26" Opening. New 5.25" O.D. Kelly in 2023, Rebuilt Chain Case, New Hydraulic System, New Breakout Wrenches, Major Engine Work done in 2023. Rig is Equipped with a Hydraulic Sandline Winch, Leveling Jacks, Reverse Swivel & Kelly. Tool Joints are Bottleneck Joints at around 6.25 OD Pipe is 5". Truck has a 13-Speed Transmission. Nice Little Rig in Great Condition that is Set Up for Mud and Reverse Air. Rod & Tooling Available for an Extra Cost. SOLD
Sold - SRS #4227
DESCRIPTION: Flatwater Fleet; Model: RTB-1500; Mounted On: 1999 Volvo; Truck Engine Make: 300 HP; Condition: SOLD; Tools/Options: Flatwater Fleet RTB-1500: SOLD One Owner, Flatwater Fleet Rig Tender, Two 100 Gallon Fuel Tanks with Pump and Reel, 20.000# Front Mounted Ramsey Winch, IMT 8,600# Crane. Truck Engine has approx. 250,000 Miles and 13,000 Hours, 8-Speed Transmission, Full Locking Rears. Maintenance & Repair Records Available.
Sold - SRS #4298
DESCRIPTION: Model: 2,600 Gallon; Mounted On: 1999 Sterling L-9513; Truck Engine Make: CAT C-12; Tires: Good; Condition: SOLD; Tools/Options: Flatwater Fleet 2,600 Gallon: SOLD Rear Air Tag Axle, 220 Gallon Auxiliary Fuel Tank, No Current Leaks but has some Rust Flakes. In approx. 2017 the Bed was Sandblasted, Repainted, Undercoated and Rewired. Good Brakes & Tires, Rear Ends have been Replaced and Transmission Rebuilt within the last 10 Years. CAT Engine Freshened up in approx. 2012, approx. 60K Miles Since. Truck also has a Jake Brake and Total Miles are < 600,000. Maintenance Records Available Upon Request. Owner Believes the Tank is a Flatwater Fleet. SOLD
Sold - SRS #4296
DESCRIPTION: 2017, Hunke; Model: 6T; Mounted On: 2017 Dodge Ram 5500 4WD; Truck Engine Make: Cummins 6.7 L Turbo Diesel; Condition: SOLD; Tools/Options: Hunke 6T Year: 2017: SOLD Truck has 47,000 Miles. Corded Remote, Full Lighting Package, (2) Manual Tilt Pipe Racks, WeatherGuard Tool Boxes, No Sandline. Stored Inside. Truck has an 84" Cab Axle Wheel Base, Automatic Transmission.
Steel - SRS #4324
DESCRIPTION: Schramm; Tools/Options: (6) Joints of Schramm Aluminum Drill Rod. 4.5" OD X 20' Lengths with 3.5" Regular Threads, Runs Pin Down.
Sold - SRS #4321
DESCRIPTION: Late 70's, Ingersoll Rand; Model: TH-60; Compressor: Screw; Engine: PTO; Mounted On: Paystar 5000; Truck Engine Make: Detroit; Condition: SOLD; Tools/Options: Ingersoll Rand TH-60: Late 70's Parts Rig. Hydraulic Motor and Valve Bank were both Rebuilt. Rig hasn't run in about 3 years. SOLD
Sold - SRS #4320
DESCRIPTION: 1978 or 1979 to be confirmed, Ingersoll Rand; Model: TH-60; Compressor: Screw; Mud Pump: None; Engine: PTO; Mounted On: Paystar 5000; Truck Engine Make: Detroit; Condition: SOLD; Tools/Options: Ingersoll Rand TH-60 Year: 1978 -1979 PTO: Owner Believes it is a 1978 - 1979 Year Model, to be Confirmed. Size of Air Compressor needs Confirmed, may be a 750/250. Only used one time. Current owner runs a trailer mounted mud pump with its own power (not included). Sandline, Rod Rack, Carousel. Rig is set up to run 3.5" X 2-7/8" IF drill pipe. Some pipe included 400' - 500'. SOLD
Sold - SRS #4319
DESCRIPTION: 1981 , Badger; Model: 1250; Compressor: GD 667; Mud Pump: GD 5X6; Engine: PTO; Mounted On: 2022 Freightliner; Truck Engine Make: Cummins ISX 12; Condition: Ready to Work; Tools/Options: Badger 1250 Year: 1981: 2003 Stationary Rotary Table with a 7-1/2" Opening, Four Leveling Jacks, 5-Speed Rotary Transmission (new in March 2024). Truck has an 8-Speed Transmission, Full Lockers, Spring Suspension, Jake Brake, Odometer Reads 21,000 Miles (registers driving and drilling).
Rotary H-I - SRS #4315
DESCRIPTION: 1995, Ingersoll Rand; Model: T4; Compressor: 1050/350; Mud Pump: Hydraulic 5X6 Duplex with Pit and a 3" Wilden; Engine: Cummins K19 600 HP; Mounted On: CCC 22/46 Axles; Truck Engine Make: Cummins L 10 330 HP; Tires: Good; Condition: Excellent Overall - Working Daily OFF MARKET; Tools/Options: Ingersoll Rand T4 Year: 1995: TEMPORARILY OFF MARKET. Spur Gear Head, 7-Pod & 4-Pod Carousels, 40K Pullback, CAT Injection Pump. Hydraulic 5X6 Mud Pump with Pit, 3" Wilden Pump, Power Extending Jib, Over-Center Main Winch. New Radiator & Cooler, Main Pumps are New also. 400' of 4.5" Drill Rod and collars Available for an Extra Cost along with a Spare K19 Cummins and a Selection of Parts. Carrier has 22/46 Axles and approx. 70K Miles on it. Approx. 14K Overall Hours. Working Drill.
Sold - SRS #4313
DESCRIPTION: Rosewall; Model: 2,000 Gallon (2018 year model); Mounted On: 2007 IHC; Truck Engine Make: Cummins L 10; Tools/Options: Rosewall 2,000 Gallon Water Truck: 2018 Year Model 2,000 Gallon Rosewall Flat Tank, 23' Deck Length, 110 Gallon Diesel Tank, 6,000# Crane. Truck has Lots of Power, Jake Brake, 70,000 GVW, Odometer Reads 142,376 Miles.
Cable - SRS #4317
DESCRIPTION: Cyclone; Model: 36; Engine: 4-Cylinder Red Seal Continental Industrial; Mounted On: 1974 C60 Chevy; Condition: Truck & Drill are Job Ready; Tools/Options: Cyclone 36: Single Piece Mast, Hydraulics for the Raising the Mast. Rebuilt Countershaft with Clutches. Red Seal Continental Industrial Deck Engine. Truck has a 4-Speed Transmission with High and Low. Includes a Full 4-1/4" X 20' Stem Drilling Tool with Hydro Lift, 6" Bit, Bumper Jar. 400' of Drill Cable.
Sold - SRS #4314
DESCRIPTION: Geo-Loop; Model: 50-500; Mounted On: Tandem Axle Trailer; Condition: SOLD; Tools/Options: Geo-Loop 50-500: Geo Loop 50-500 Grouter with Hose Reel & Hose, Ezload 2500 that holds 2,500# of Sand and Mfg. Rating of 500-800 Pound/Minute. Toolbox on Trailer. SOLD
Sold - SRS #4311
DESCRIPTION: Earthdrill; Model: 36; Mounted On: 1981 Ford F250 4WD; Condition: SOLD; Tools/Options: Earthdrill Inc 36: SOLD 50' Extending Kelly. 48" and 30" Bucket along an Auger. Rig has had very little use, little wear. All the Breaking system on the Truck has been Replaced. Truck & Rig Rung Great. SOLD
Auger - SRS #4164
DESCRIPTION: 1962, Mobile; Model: B61; Mounted On: IHC 4700; Truck Engine Make: Diesel; Condition: Parts Rig; Tools/Options: Mobile B-61 Year: 1962: Parts Rig. A lot has been put into it to keep it operable over the years. Lots of New Parts and Nice Setup with Wireline, Main Hoist, Cathead, Auger Rack, Tool Boxes and Moyno 3L6 Pump. Rig needs new spindle bearings to drill, could be put back in service with a few bearings and seals. Truck is in Good Shape.
Steel - SRS #4310
DESCRIPTION: Drill Steel; Tools/Options: 4.5" OD X 20' Drill Rod with 3.5" IF Threads, Wrench Flats on both Ends, Flush Joint. Approx. 1,000'.
Sold - SRS #4303
DESCRIPTION: 2019, CME; Model: 85; Mud Pump: GD 5X6; Engine: 6-Cylinder Diessel; Mounted On: 2019 Mack Granite; Truck Engine Make: Cummins 300 HP; Condition: Good; Tools/Options: CME 85 Year: 2019: SOLD Core, Auger, Mud Rotary Capable. 31' Mast, 10,000# Hoist, In/Out & Sideways Slide Bases, 8" Cathead, 4,000# Capacity Hydraulic Hoist, Hydraulic Wireline Hoist, Quick Disconnect Spindle Adaptor, Hollow Universal Drive (4.25 HD), Hydraulic Oil Shut Off Valves, 3L8 Moyno Water Pump, 2" Discharge Plumbing for Two Pumps, Standpipe with Hose, Water Swivel, Discharge Hose with GD Service Tee & Bypass, Ball Valve for 2" Plumbing, Rod Holder & Breakout Wrench, 140# Auto SPT Hammer Assembly, (3) 36" Jacks and a Second Front Jack 36" 4.5" O.D., Tilting Front Jack, Tool Hooks, Larger 172" Platform. Aluminum Tool Box, Hydraulic Auger Rack. No Tooling Available. Rig Engine Hour Meter Reads 2,628 Hours. Truck has a 6-Speed Allison Automatic Transmission, Hi/Lo Jake Brake, Full Lockers., approx. 27,168 Miles. Decked Out with Polished Aluminum, LED Work Lights, Premier Interior, Surround Grill. SOLD
Sold - SRS #4308
DESCRIPTION: Mayhew; Model: 1000; Compressor: 667 LeRoi; Mud Pump: 5X6; Engine: PTO; Mounted On: 1975 Mack R685; Truck Engine Year: Mack Diesel; Condition: SOLD; Tools/Options: Mayhew 1000: SOLD Truck Runs and Starts Good. New DSM Square Tube Mast, Rig is Straight and Rust Free. 4 Jacks. Mud Pump has a New Fluid End and a Good Gear End. Compressor has Good Oil Pressure, Looks New Inside, Air Operated Clutch, 5-Speed Rotary with Reverse, New Swivel, New Pulldown Chains, Variable Speed Pulldown with Air Engagement, Air Throttle, All New Cables and Fluids. Every Gearbox was Drained and Inspected. Rod & Tooling Available for an Extra Cost. Includes 200' of Drill Rod. SOLD
Rotary G - SRS #4173
DESCRIPTION: Gardner Denver; Model: 1400; Compressor: GD 667; Mud Pump: 5X6; Mounted On: 1999 Kenworth; Tools/Options: Gardner Denver 1400 OFF MARKET
Sold - SRS #3778
DESCRIPTION: Ingersoll Rand; Model: TH-50 Cyclone; Compressor: 500/250; Mud Pump: 5X6; Engine: PTO; Mounted On: 1992 IHC 4900; Truck Engine Make: 466 250 HP; Condition: SOLD; Tools/Options: Ingersoll Rand TH-50 Cyclone: SOLD 2nd Owner. Previous Owner Overhauled Power Tower and New Suspension all Around, Newer In-frame. Rig was Painted in 2015. Compressor not run hard, was just used for development, not drilling. Repaired and replaced cables and hoses as needed. Includes 600' of 3.5" IF X 15' Flushwall Drill Pipe. Truck has a 10-Speed Transmission and Odometer Reads 289,718 Miles. SOLD
Sold - SRS #4306
DESCRIPTION: 2006, Geo-Loop; Model: 40-500; Engine: 24 HP Honda GX670; Condition: SOLD; Tools/Options: 24 HP Engine, Approx. Grout Pump Discharge 35 US Gallon per Minute @ 500 PSI. Approx. 60 Gallon Mixing Tank, 12 Volt DC Electric System. Geo-Loop 45" Hose Reel Drum Capacity: 500' of 1" Grout Line or 350' of 1-1/4" Rubber Hose, approx. 800# Pulling Capacity, and 0-130' Per Minute Travel Speed. 2015 Unused Power Reel that Holds 300' of 1-1/4" or a 500' Reel Available. Available for an extra cost: 2017 14,000# GVWR Trailer. Can be sold without the power reel. SOLD
Sold - SRS #4304
DESCRIPTION: 1977, Driltech; Model: D40K; Compressor: Low Air 750/250; Mounted On: CCC; Truck Engine Make: Small Cam 350; Condition: SOLD; Tools/Options: Driltech D40K Year: 1977: SOLD Long Tower, Runs 25' Drill Rod, Dual Carousels. New 15-Speed Transmission, Clutch, Drivelines, Tires and Wheels. All Hydraulic Hoses Changed in 2023, New Parts have < 40 Miles and 3 Hours of Use. Includes a Newer 6" Mincon Hammer (300') and Two Newer Bits, (1) Used 8" Sandvik Hammer & Hole Opener Bit, 1,000' of Drill Rod and Hand Tools. SOLD
Sold - SRS #3584
DESCRIPTION: Parts & Tooling ; Tools/Options: SOLD 23" King Drill Bit. 23" Over the Hammer Sleeve for QL 120 Hammer. Barber X Beco Sub (10-3/4" OD, 6" Barber Thread). Diverter Heads/Adapters (24" X 16", 20" X 16", 18" X 16"), 8", 10". Diverters/Adapters (12", 20", 24"). Jaws: 8", 10", 16", 18", 20", 24". Call for Price. Open to Offers.. SOLD
Sold - SRS #4216
DESCRIPTION: Ingersoll Rand; Model: T4W; Compressor: 900/350 HR2; Engine: CAT 3406; Mounted On: 1998 3-Axle CCC; Truck Engine Make: CAT; Condition: SOLD; Tools/Options: Ingersoll Rand T4: Pre-Emission Engines, 4-Cyl Bean Injection, 900' of 4" X 25' Pipe Included, Pipe Trailer for an Extra Cost. Rebuilt Box and New Chains. Maintenance Records Available. SOLD
Sold - SRS #4293
DESCRIPTION: 1999, Schramm; Model: T450WS; Compressor: 850/350 with Clutch; Engine: CAT 3406C; Mounted On: 1998 IHC 4900; Truck Engine Make: DT 530 300 HP; Condition: Working Drill; Tools/Options: Schramm T450WS Year: 1999: Standard Mast, 7,000# Winch. Set up to Run 4.5" Rods with 2-7/8" Threads. New Manifold, Brakes, Walking Beam Bushings and New Upper Chains. Jacks Repacked and Rehosed. Truck Odometer Reads 34,224 Miles. Hour Meter not Working. Owner estimates 12K Rig Hours and approx. 3K Compressor and Engine Hours. Compressor redone, Deck Engine was Purchased Rebuilt about 4-5 Years Ago. Excellent Strong Running Deck Engine, Fires Good in cold Weather. Pipe and Tooling Available for an Extra Cost.
Sold - SRS #4285
DESCRIPTION: 2001, Simco; Model: 5000; Compressor: Plumbed; Mud Pump: 3X4 Mission; Engine: PTO; Mounted On: 2017 IHC 4300; Truck Engine Make: Diesel; Condition: SOLD; Tools/Options: Simco 5000 Year: 2001: Rigs doesn't have an on-board air compressor but it is equipped with the control valve and hoses for one to be hooked up, plenty on deck space. Allison Transmission. 700' of Mayhew Jr Drill Rod Available, Rig is Set Up to Run 20' Drill Rod. Single Axle Truck. Truck has approx. 111,000 Miles on it, 33,000# GVWR.
Sold - SRS #4252
DESCRIPTION: Flatwater Fleet; Mounted On: IHC; Tools/Options: 2011 Flatwater Fleet 2,500 Gallon Tank with Pump and 8,000# 6025 IMT Crane. Truck has 40,000 Miles on it, 8-Speed Manual Eaton Fuller Transmission. SOLD
Rotary E-F - SRS #4290
DESCRIPTION: Failing; Model: 2500-CF Holemaster; Mud Pump: Plumbed; Engine: PTO; Mounted On: CCC; Truck Engine Make: 903 Cummins; Condition: TEMPORARILY OFF MARKET; Tools/Options: Failing 2500-CF Holemaster: TEMPORARILY OFF MARKET. Double Drum, 90K Hook Load, Hi-Low Speed, 18" Ewbanks Table, Air Clutches, Kelly Line, Traveling Line and Small Winch with approx. 2,000' of 3/8" Cable. Drill is Plumbed for a Mud Pump and has the Clutches.
Rotary D - SRS #3925
DESCRIPTION: 2007, Deep Rock; Model: 150 4X Track; Compressor: Plumbed; Mud Pump: 4X3 Centrifugal; Engine: PTO; Mounted On: Tracks; Truck Engine Year: 120 HP Perkins Diesel; Tools/Options: Deeprock DR 150 4X Tracks Year: 2007: Geothermal Drill Great for Tight Residential Areas. Tophead Torque 2,500 or 5,000 Ft. Lbs. Tophead Rotation 1-150 or 0-75 (hi torque), 16,000# Pullback. Approx. 2,288Hours, Runs 10' Drill Pipe, 11' Stroke, Mast can Handle 20' Casing, has a Jib Boom and Auto Breakout, Includes 300' of 2-3/8" Mayhew Jr. Drill Rod, One each 2-3/8" X 4-1/2" reg., 2-3/8" X 2-3/8" reg., 2-3/8" X 2-7/8" reg Bit Subs, Rosewall Grouter with 2" Bowie Pump (new pump), 200' of Jet Auger, Mud Pan, Desander Cone. Current Owner has Run a Portable Air Compressor in the Past, Just Plugs in.
Rotary E-F - SRS #3363
DESCRIPTION: Failing; Model: 1000; Compressor: LeRoi 256; Mud Pump: Gardner Denver 5X6 Piston; Engine: PTO; Mounted On: 1974 Mack; Truck Engine Make: V8; Condition: PRICE REDUCED; Tools/Options: Failing 1000 : PRICE REDUCED Truck has Low Miles. Drill Sat for 30 Years in a shop. New 2" Little Giant Swivel, 23' Kelly, 5-1/4" Non Retractable Table, Two Hydraulic Jacks, Rod Box, Driller & Operator's Platforms.
Sold - SRS #4280
DESCRIPTION: 1989, Ingersoll Rand; Model: T3W; Compressor: 850/350; Engine: Cummins; Mounted On: 1993 Freightliner 108; Truck Engine Make: Detroit Series 60; Condition: Ready to Work; Tools/Options: Ingersoll Rand T3W Year: 1989: Truck has approx. 48,000 Miles on it. Cummins Deck Engine was Replaced in 2021, approx. 1,100 Hours on it (good, strong motor). New Radiator & Hydraulic Hoses, Complete Service Performed Recently (+/- 2023). Includes 800' of Drill Rod, Brand New 6" Hammer with Bit, 8" Hammer with Bit, 6-3/4" Roller Cone Bit with Stabilizer, Several Bits from 5-5/8" to 8", 24' Deck Over Trailer, Lincoln Ranger 8 Welder, Cutting Torches, Misc. Tooling. 400 Gallon on Board Diesel Tank.
Sold - SRS #4288
DESCRIPTION: 2005, Schramm; Model: T450WS; Compressor: 900/350; Engine: CAT 3406; Mounted On: 2008 Peterbilt; Truck Engine Year: 600 HP Cummins; Condition: SOLD; Tools/Options: Schramm T450WS Year: 2005: SOLD New CAT Deck Engine with Factory Warranty and < 200 Hrs. Compressor Rebuilt within the last few years with approx. 2,000 hours since. Recently Installed (3) New Main Pumps, New Fan Motor, New Coolers, Table and Chains. Rig has a 20 GPM Bean Water Injection Pump, 10-Pod Carousel and is set up to run 3.5" O.D. Drill Rod, No Sandline. Available with or with 600' of Near New Drill Rod. SOLD
Sold - SRS #4283
DESCRIPTION: Monitor; Model: Owner Believes it's a 33; Mounted On: Unmounted; Tools/Options: Unit isn't beat up but needs some work. Good one to rebuild. SOLD
Rotary E-F - SRS #3935
DESCRIPTION: Failing; Model: 2500; Engine: Detroit 4031C (to be confirmed); Mounted On: Trailer; Tools/Options: Failing 2500: Single Line Machine, 18" Failing Rotary Table, 58' Mast with 6-Part Line (replaced approx. 10 years ago), 67,500# Pull with a Static Load of 90,000#. Rat Hole, Sandline, King Swivel, Hydromatic Brake. Many Parts Recently Replaced including Drum Brakes, Clutch Pads, Drive Shaft and Gearbox. Deck Engine, Drawworks and Rotary Table all worked on within the past 2-3 Years ($70K put into repairs). New Mainline Cable in 2018, a lot of work done to engines and rotary table a few years ago in approx. 2017. Newer 4-1/4" Square Bushing. Capable of Range II Drill Pipe. Can Include a Mud Pump and Tongs.
Auger - SRS #3765
DESCRIPTION: 1991, Diedrich; Model: D-120; Engine: John Deere Inline 6 Diesel; Mounted On: 2001 Sterling; Tools/Options: Diedrich D-120 Year 1991: 2024 Recently Rebuilt the Transmission and Installed a New Diedrich Kelly Bar. John Deere Engine has approx. 990.3 Hours. 3,000#, 7,000# and 10,000# Winches, 3L8 Moyno. Cathead, Fluted Kelly, (2) Auger Racks, Tool Boxes, (4) Outriggers and 500 Gallon Water Tank. Truck has a 10-Speed Transmission and Odometer Reads 578,364 Miles.
Sold - SRS #2844
DESCRIPTION: Gardner Denver; Model: 1000; Compressor: Atlas DT-4 1050/125; Mud Pump: 5-1/2" X 8"; Engine: PTO; Mounted On: 1975 International 4200; Truck Engine Make: 8V71; Condition: SOLD; Tools/Options: Gardner Denver 1000: SOLD Excellent Condition Well Maintained Drill with Very Low Miles. Second Owner, has only Drilled Water Wells. 38' Mast, All Air Clutches except for on Table, Mechanical. 7-1/2" Stationary Table, chain Pulldown, all NEW Cylinders on Drill, Rod Box, 4 Leveling Jacks. Tandem Axle Truck Runs Good and has a 13-Speed Transmission. Will include 300' of Drill Rod.
Sold - SRS #4008
DESCRIPTION: Mounted On: 2005 Mack CL 700; Truck Engine Make: ISX 565 HP; Condition: Fair - Has some cosmetic damage; Tools/Options: 2,500 Gallon Water Bed/Pipe Truck. Bed is 23' Long with Tool Boxes. Truck has approx. 290,000 Miles on it, 8LL Transmission, Full Locking Rears, 20,000# Front and 40,000# Rears, Electric Windows. New Radiator and Air Tanks. Truck has some cosmetic damage to hood/fender from tire blowout. SOLD
Auger - SRS #4275
DESCRIPTION: Mobile; Model: B47; Engine: PTO; Mounted On: 2008 Ford F-550 4WD; Truck Engine Make: 6.4 L Diesel; Condition: Working Drill; Tools/Options: Mobile B47: Cathead. Mast is 17' high to the top of the bed. One Winch Line, Safety Hammer. Tooling Included.
Sold - SRS #4274
DESCRIPTION: Smeal ; Model: 3T; Mounted On: 1998 Chevy 3500 4X4; Truck Engine Make: 350 Gas; Tools/Options: Smeal 3T: Truck has approx. 68,0000 Miles on it. Front Tires are about 90%, Rear Tires are Near New.
Sold - SRS #4200
DESCRIPTION: Rosewall; Mounted On: 2002 Sterling; Truck Engine Make: CAT C12 455 HP High Output; Condition: SOLD; Tools/Options: One Owner! 2,000 Gallon Rosewall Water Bed that was Refurbished in 2008. Dual Transfer Tanks with a 100' Hose. 2019 Stellar EC3200, 20' Aluminum Crane with Wireless Remote. Truck has an 8LL Eaton Fuller Transmission, Full Locking Rears, 220 in WB, 20K Front and 46K Rear Axles, Double Frame. Odometer Reads 184,326 Miles. SOLD
Sold - SRS #4271
DESCRIPTION: 1994, EZ Bore; Model: Swinger 45; Engine: PTO; Mounted On: 2006 GMC 4500 4WD; Truck Engine Make: Duramax Diesel; Condition: Good; Tools/Options: E-Z Bore Swinger 45 Year: 1994: 6,000# Hoist, Single Line. Truck has approx. 75,397 Miles on it.
Sold - SRS #4267
DESCRIPTION: Condition: SOLD; Tools/Options: Approx. 1,500' of 3.5" OD X 20' Drill Pipe with 3.5" IF Threads. Additional Tooling also available: Crossover Subs, Welder and other misc. drilling equipment. SOLD
Sold - SRS #4266
DESCRIPTION: Mounted On: 2000 Kenworth T-800; Truck Engine Make: CAT C12; Condition: SOLD; Tools/Options: Water/Service Truck with a 1,800 +/- Gallon Tank. Truck Odometer Reads 576,907 Miles. SOLD
Sold - SRS #4265
DESCRIPTION: 1991, Ingersol Rand; Model: TH-75; Compressor: 900/350; Mud Pump: Centrifugal; Mounted On: IHC Paystar 5000; Truck Engine Make: N14 Cummins; Condition: SOLD; Tools/Options: Ingersoll Rand TH-75 Year: 1991: SOLD Hours Unknown. Rig is Set Up for 3.5" Drill Pipe. Pipe available for an extra cost. Water Truck and additional Tooling also available: Crossover Subs, Welder and other misc. drilling equipment. SOLD
Sold - SRS #4263
DESCRIPTION: 2001, Flatwater Fleet; Model: RSB 3200; Engine: PTO; Mounted On: 2001 IHC 5600 I 6X6; Truck Engine Make: DT 530, 330 HP; Tires: New; Condition: Good; Tools/Options: Flatwater Fleet RSB 3200: Frac unit is set up for deeper wells but can do 6" 200' holes all day long, efficient rig, 3000 psi - 100 GPM. Truck has an 8LL Transmission, New Crate Engine Jan. 2022 with < 8,000 Miles, New Clutch, Tires and Rear Brakes. Truck Engine is Driven via Pump off the FEPTO Port, Odometer Currently Reads 174,333 Miles. Tooling Included, 600' Hydraulic Downhole Camera System, 480 Linear Feet of Stainless Frac Pipe, Pipe Elevators, Pipe Clamps, Extra Bladder Kit, Extra Frac Pump Controller, Bottle of Nitrogen Gas & Gauges, Jetting Tool, Air Lift Tool, Complete set of 8" Doughnuts & Washers, 6" Extra Packer Doughnuts, Two Sets of New Valves for Frac Pump.
Sold - SRS #4260
DESCRIPTION: Bucyrus Erie; Model: 22W Series I; Engine: 6-Cylinder Hercules Gas; Mounted On: 2001 GMC 6500; Truck Engine Make: CAT 3126; Condition: SOLD; Tools/Options: Bucyrus Erie 22W Series I Year: Truck has Air Brakes. Has both Drill Line and Sand Line on the Drums. Drawworks and Deck Engine are Quiet. Ring Gears & Pinions are in Good Condition. Does not have Hydraulic Jacks. Southern Truck that is Solid and Runs Good, no Rust. Truck has a 6-Speed Transmission, Starter was Rebuilt Recently in 2023. SOLD
Sold - SRS #4251
DESCRIPTION: 1976, Smeal; Model: 3T; Engine: PTO; Mounted On: 2005 Ford F-350 4WD; Truck Engine Make: V-10 Gas; Tires: Brand New; Condition: SOLD; Tools/Options: Smeal 3T Year: 1976: Double Drum (equal to a 5T), Sandline, Smeal has a plug for a Remote (no cord). Truck has a 9' Bed and 110,000 Miles on it, Manual Transmission, A/C, Power Windows. Boxes are a few years old. The Pump Hoist has lots of new parts but needs a few little things repaired. The PTO cable needs repaired, current owner engages it manually now.
Sold - SRS #4257
DESCRIPTION: 2018, Diedrich ; Model: D50; Mud Pump: Moyno; Engine: PTO; Mounted On: 2018 Tracks; Truck Engine Year: John Deere 4-Cylinder Turbo 4.5L Powertech Tier 3; Condition: SOLD; Tools/Options: Diedrich D-50 Year 2018: Engine has approx. 6,000 Hours. Moyno 3L6 Pump, 250 Gallon Steel Water Tank, Tramming Winch, Auto Hammer (no cathead), Rear Auger Rack, Custom Rod Racks for 5' and 10' Rod, Two Remote Controls, Slide Base, In/out Wiggle Tail, Three Hydraulic Work Hoists (Main 7,000#, Auxiliary 2,000#, WL 800#), Breakout Wrench, Through Spindle Mounted King Water Swivel, Hydraulic Rod Table/Clamp, Dropdown Side Work Table, Custom Drillers Platform, Flip Down Sheave Block for Lower Tramming/Travel Clearance, SPT Auto Hammer Calibration Certification. SOLD
|
Southern Office: 1485 DeSoto Blvd N Naples FL 34120 Phone: 239.774.1939 |
Northern Office: Oil City PA 16301 Phone Toll FREE: 1.888.204.3907 |