Auger
Auger - SRS #3528
DESCRIPTION: 2011, Mobile; Model: B-37 RAD; Engine: PTO; Mounted On: MT 20 Rubber Tracks; Truck Engine Make: Deutz 230 Diesel Tier 3; Condition: OFF MARKET; Tools/Options: Mobile B-37 RAD Year: 2011: OFF MARKET Rig, Track Carrier and Engine was Recently Refurbished and is Ready to Drill. Engine approx. 1 year old, installed 2020, has approx. 1,500 hours or so since. Rig Itself has approx. 8K to 10K Hours. Hydraulic Components Powered by Dual Piston Hydraulic Pumps, both Pumps @ 3,600 PSI. One Pump is used for the Rotation, the Second is used for Feed, Auxiliary Functions and the Water Pump. 60 Gallon Capacity Hydraulic Oil Tank. Two Speed Hydraulic Motor through a Planetary Drive. Two-speed Head has 3600 lb.-ft of Torque @ 75 RPM in Low Speed and 1800 lb.-ft @ 150 RPM in High Speed. High Speed Coring Head with 390 lb.-ft Torque @ 772 RPM. Both Tophead Drives are Mounted on the EZ-SELECT which allows for one touch control to change from standard rotation to high speed coring. Two Hydraulic Mast Raising Cylinders. Mast and Feed Frame Fold to 90° for Transport and is Angle Drilling Capable. SLIDRAMATIC Rotary Drive System. 15,7003 Pullback @ 0-80 fpm and the Maximum Pulldown is 11,700# @0-106 fpm. 6' Feed Stroke, approx. 15' from the Ground to the Top of the Crown. 4,500# Auxiliary Hoist, SAFE-T-DRIVER Hoist with 900# Capacity, Bi-directional Hydraulic Planetary Hoist with Hydraulic Brake, Hydraulic Break-Out Wrench, Hydraulic Rod Clamp, 140# Auto SPT Hammer, 2,500# Cathead, Side Port 1-1/2" NPT Rotary Swivel, 2" Mast Standpipe, 1-5/8" Hex Safety Drive Coupling. 3L6 44 GPM Water Pump, 2" Suction Port and 1-1/4" Discharge Port. Tracks are 99" Long, 20,000# GVWR, 2-Speed Hydraulic Planetary Drive. Narrow Access Carrier has Extendable Tracks that allow for a Total of 12" of Track Adjustment, Minimum Width of 35". 13,000# Expandable Track Carrier Expandable from 35-3/8" to 47-3/8", 74 HP Air Cooled Engine, 12 Volt Starting Circuit, 37 Gallon Fuel Tank, Two Front and Two Rear Leveling Jacks. Rig Expands to 6' 8" but can fold up 36" wide for narrow access spots. Trailer Included. OFF MARKET
Auger - SRS #3519
DESCRIPTION: Spiradrill; Mud Pump: 4" Mission Hydraulic Centrifugal; Engine: 6-Cyl Deutz Diesel; Mounted On: 1998 Mack; Truck Engine Make: E7-400; Tires: New; Condition: Excellent; Tools/Options: Spiradrill: Entire Deck Retracts/Slides about Two Feet. 4" Mission Hydraulic Pump, 2" High Pressure Swivel, (3) Hydraulic Winches with 3 Lines, Hydraulic Rope Cathead, 22' Stroke, 12,000 Ft Lbs of Variable Drilling Speed Torque. Includes 15 Joints of 5' X 5" X 1-5/8" Solid Stem Auger. 80' of 6" HAS, 50' of 4" HAS Available. All Tooling Complete for Geotech Work, Arod, 5" 6' collar. Arod for Truck has an 8-Speed Transmission and approx. 225,558 Miles on it, New Rubber, Wide Tires on Front. Rig and Truck in Excellent Condition.
Auger - SRS #3474
DESCRIPTION: 2018, Mobile; Model: Voyager V2200; Engine: Kohler CH25; Mounted On: Frame; Tools/Options: Mobile Voyager V2200 (2018): Hydraulically Powered Drill, Two Mast Stabilizers, Maximum Rotary Speed of 150 RPM, Maximum Torque of 950 ft-lbs, 6' Stroke, 5,000# Pullback, 5,000# Retract, Feed Speed Down & Retract 90 ft/Min., Variable Speed. Air Cooled 25 BHP Gasoline Engine, Electric Start. Onan or Deutz Engines are Optional. Variable Displacement Hydraulic Pump. Estimated Operating Capabilities: Rotary & DTH Drilling, 3.5" OD: 125', Capabilities Vary According to Subsurface Conditions.
Auger - SRS #2946
DESCRIPTION: 1988, Mobile; Model: B24; Engine: Deutz; Mounted On: Trailer; Tires: New; Condition: Working Drill Prior to being Parked; Tools/Options: Mobile B24 Year: 1988: High Torque Head, (box available to mount a high speed head), Cathead, 15' Mast, Vickers Pump, Swing-out Head (no slide). No Water Pump. Rope in good shape, near new
Auger - SRS #3177
DESCRIPTION: 1990, Mobile; Model: B57; Compressor: None; Mud Pump: None; Engine: Cummins 4BT-3.9; Mounted On: 1990 Ford F-800; Truck Engine Make: Diesel; Tools/Options: Mobile B57: Approx. 6,358 Rig Hours and approx. 158,126 Miles on Truck. Moyno 3L6 Pump, (3) Hydraulic Leveling Jacks, Auger Racks on both Sides, Cathead, Wiggle Tail, Slide Base (2) Winches - 8,500# & 3,200#. One of the Hydraulic Lines needs Replaced, Owner will either Replace it or Compensate for it. No Tooling Included. Gearboxes have been Rebuilt. PRICE REDUCED, GREAT BUY. Will remove from the truck and sell just the rig.
Auger - SRS #3403
DESCRIPTION: Mobile; Model: B-56; Compressor: N/A; Mud Pump: 3L6 Moyno; Engine: 240 Ford Gas; Mounted On: 1994 IHC 4900; Truck Engine Make: Diesel; Tools/Options: Mobile B-56: Two Swing Out Auger Racks, Cathead, 400 Gallon Water Tank, Two Leveling Jacks,.
Auger - SRS #3402
DESCRIPTION: Mobile; Model: B57; Compressor: None; Mud Pump: Moyno 3L6; Engine: Ford 300; Mounted On: Gemco Articulating Buggy; Truck Engine Make: Detroit Diesel; Condition: Runs Good; Tools/Options: Mobile B57: Auto Hammer, (2) Leveling Jacks. New Clutch in Front Engine. No Wiggle Tail. Weighs approx. 18,000#. No Hi-Low for Differential.
Auger - SRS #3280
DESCRIPTION: 1988, Deeprock; Model: Ram 10 XL; Compressor: None; Mud Pump: None; Engine: Deutz Diesel; Mounted On: 1970 Ford F600; Truck Engine Make: 361 Ford V8; Tools/Options: Deeprock Ram 10 XL: Rig has been Sitting Indoors for a While. Engine in Truck was Rebuilt Prior to being Parked (very low mileage). Deutz Engine Powers Hydraulics. 806 Hours on Rig, 140# Hammer, Three Hydraulic Stabilizers. Includes 30' of 6-1/4" ID Hollow Stem Augers, 35' of 4-1/4" ID Hollow Stem Augers, 45' of AW Rod with Pin-to-Pin Couplings, 50' of 4-1/2" Solid Stem Augers, 30' of 5-1/2" Solid Stem Augers, One Fishtail Bit, Auger Hoisting Assembly, Two 24" Split Spoons, Two 18" Split Spoons, Mounted Steam Cleaner with 1400 psi, 209 Degree Water, Adjustable Nozzle.
Auger - SRS #3154
DESCRIPTION: 1987, Mobile; Model: B53; Compressor: N/A; Mud Pump: NA; Engine: PTO; Mounted On: ATV; Truck Engine Make: Ford 6-Cylinder Industrial; Tires: Good; Condition: Fair, Working Drill; Tools/Options: Mobile B53 Year: 1987 PTO; Compressor: N/A; Mud Pump: N/A; Mounted On: ATV; TrEngine: , Ford 6-Cyl Industrial; Tools/Other Options: (2) Jacks, Moyno 3L6, Tool Boxes, Auger Racks, ROPS. Working Drill.
Auger - SRS #2980
DESCRIPTION: 2008, Soilmec; Model: SR 100; Compressor: None; Mud Pump: None; Engine: PTO; Mounted On: Tracks; Truck Engine Make: Deutz 643 HP; Condition: Good; Tools/Options: Soilmec SR 100: Track Length Extended 16'9", Retracted 11'1". 9'10" Maximum Pile Diameter, 99" Maximum Cased Diameter, 282' Maximum Pile Depth, 333,378 ft. lb. Torque, 17.4 RPM Maximum Drilling Speed, 72 RPM Spin off Speed, 74,187# Main Winch Line Pull, 31,473# Auxiliary Winch Line Pull. Engine has 643 HP at 1900 RPM. 256" Crowd Stroke, Main Twin Pumps. Operating Weight is 125 Ton without Kelly and tooling.
Auger - SRS #2753
DESCRIPTION: Ardco; Model: CD 320; Compressor: N/A; Mud Pump: 3X4 Mission; Engine: PTO; Mounted On: 1994 International 4700; Tools/Options: Ardco CD 320: Hydraulic Rod Box, Swing-Out Tophead. 2300 RPM, Includes 320' of 1-1/2" Rod.
Auger - SRS #2724
DESCRIPTION: 1986, Acker; Model: Soil Century; Compressor: N/A; Mud Pump: N/A; Engine: Deutz Diesel - Recently Rebuilt; Mounted On: 2003 Hino 181 2WD; Truck Engine Make: 4-Cylinder Turbo Diesel; Tools/Options: Acker Soil Century: Drill not used much since Rebuilt Engine was Installed. 22' Mast, (3) Jacks, Main Hoist, Cathead. Has a Moyno Pump(3L) but Currently not Working. Truck Chassis has been Beefed up Behind the Cab. Truck has approx. 140,000 Miles on it. Truck has been Reliable & Economical. 17,990 GVW.
Auger - SRS #2685
DESCRIPTION: 1987, CME; Model: 55; Compressor: N/A; Mud Pump: Moyno 3L6; Engine: Ford 300 6-Cylinder Gas; Mounted On: Ardco Articulating Buggy; Truck Engine Make: Detroit Diesel; Tools/Options: CME 55 Year: 1987: CME Auto Hammer, 25' Mast, Cathead, (2) Winches Plus Front Winch, (2) Leveling Jacks, (2) Auger Racks, 300 Gallon Water Tank, (2) Tool Boxes, Under Body Rod Storage. Rig runs good but the bearings in the rotary box need to be replaced.
Auger - SRS #2684
DESCRIPTION: 1987, Mobile; Model: B 57; Compressor: N/A; Mud Pump: Moyno 3L6; Engine: Ford 300 6-Cylinder Gas; Mounted On: Ardco Articulating Buggy; Truck Engine Make: Ford 300 6-Cylinder Gas; Condition: Working Order; Tools/Options: Mobile B 57: 3,700 Hours, CME Auto Hammer, Cathead, (2) Winches Plus Front Winch, (2) Leveling Jacks, Auger Rack, tool Box.
Auger - SRS #2678
DESCRIPTION: 1980, Shopbuilt; Model: PH 61 (Similar to a B-26); Compressor: N/A; Mud Pump: N/A; Engine: 371 90 HP; Mounted On: 2002 Western Star; Truck Engine Make: 60 Series Detroit 470 HP; Tools/Options: Shopbuilt PH 61 (similar to a B 61: Rig is Fully Hydraulic. Built in a Fabrication shop - Comparable to the B-61. (4) Hydraulic Outriggers, Hydraulic Auger Rack. 13-Speed Transmission, 20,000# Fronts, 40,000# Rears. Includes 55' of 8" HAS, 90' of Solid Stem 6" Augers. Numerous Accessories for Soil Sampling Included on Rig. Additional Tooling & Material Available for an Extra Cost. Motivated Seller, Open to Offers.
Auger - SRS #2588
DESCRIPTION: 1994, Ingersoll Rand; Model: A-300; Compressor: See Below; Mud Pump: Moyno; Engine: PTO; Mounted On: 1993 International 2WD; Truck Engine Make: DT 466; Condition: Working Daily; Tools/Options: Ingersoll Rand A-300: Set up for Air, Mud Rotary & Augering, Smaller Moyno, 8,000 Ft. Lbs. Torque Highest Rated Torque for Augering, 8,000# Hydraulic Main Winch, 4,000# Hydraulic Auxiliary Winch, 18' Mast, Can Run 15' Augers, 18,000# Pullback, 3-Speed Rotary Head (all 3 speeds do not work), Hydraulic Cathead for Geo Work, Under Body Auger Rack, Rod Rack. Miles Unknown but High due to PTO, 5-Speed Auto Transmission. Avail. for an Extra Cost: Augers, Drill Rod, Hoses, Heads, Swivels, all Tooling. Rig Currently runs 10' Pipe. Approx. 32,000# Weight Fully Loaded. Available For Extra Cost - 1990's 825/125 IR Trailer Mounted Air Compressor for Air Rotary Drilling. Compressor is Powered by a Cummins Diesel that needs Replaced or Rebuilt.
Auger - SRS #2587
DESCRIPTION: 1992, Ingersoll Rand; Model: A-300; Compressor: See Below; Mud Pump: Moyno; Engine: PTO; Mounted On: 1992 International 2WD; Truck Engine Make: DT 466 Diesel; Condition: Working Daily; Tools/Options: Ingersoll Rand A-300: Rig is Set Up for Air, Mud Rotary and Auger Work. Equipped with the Bigger Moyno for Mud Drilling, 8,000# Ft. Lbs. Torque (highest rated torque for augering), 8,000# Hydraulic Main Winch, 4,000# Hydraulic Auxiliary Winch, 18,000# Pullback, 18' Mast, Can Run 15' Augers, Hydraulic Cathead for Geo Work, 3-Speed Rotary Head, Under Body Auger Rack, Rod Rack. Truck has a 5-Speed Automatic Transmission, Hours Unknown, Miles Unknown but High due to PTO, Engine has been Rebuilt a Few Times. Avail. for Extra Cost: Augers, Drill Rod, Hoses, Heads, Swivels and all Tooling. Rig Currently Runs 10' Pipe. Weighs Approx. 32,000# Fully Loaded. Available For Extra Cost - 1990's 825/125 IR Trailer Mounted Air Compressor for Air Rotary Drilling. Compressor is Powered by a Cummins Diesel that needs Replaced or Rebuilt.
Auger - SRS #1897
DESCRIPTION: Acker; Model: Mark II; Compressor: None; Mud Pump: None; Engine: Ford 4 Cyl Gas; Mounted On: Trailer; Condition: Works Good; Tools/Options: 2' Stroke, transmission has 4/8 speeds. Blueprint manual goes with the machine. Also includes 150' of NWJ Rods (15) 10' Rods, 5-5/8" Bit with sub, NWJ Box to NW Pin, NW Box to NWJ Pin, Pull Plug, 140' of NW Rods (28) 5' Rods, 100' of NW Rods (10) 10' rods, 10' of NWJ Rods (2) 5', (1) brand new button bit, 5-7/8" OD carbide insert, hard 3-1/2" API, (1) adapter, 3-1/2" API reg box-NWJ Box, Tricone used bits, 3" & 4". Water swivel for on top, 80# hammer.
Auger - SRS #1555
DESCRIPTION: 1978, CME; Model: 750; Compressor: no; Mud Pump: 3L8; Engine: 300 Gas; Mounted On: Ardco buggy 4 x 4; Truck Engine Year: no; Tools/Options: Gas engine newly rebuilt. 3L8 Moyno Pump with transmission, (3) hydraulic jacks, tool box, auger rack, 140# auto hammer, (3) winches, quick disconnect spindle, front winch, (20) 3-1/4" HS Auger, (20) 2-1/4" HS Auger, (9) AWJ x 10' drill rod, (3) AWJ x 5' drill rod, (1) AW side feed swivel, lot of hoist tools, (2) 2-1/4" 5T auger head. Rig is tight & runs good, tools are almost new and available for an extra cost.
|
Southern Office: 1485 DeSoto Blvd N Naples FL 34120 Phone: 239.774.1939 |
Northern Office: Oil City PA 16301 Phone Toll FREE: 1.888.204.3907 |