Parts Tooling

Search:
SRS#:
Category:
Keyword:

Parts Tooling - SRS #3708

DESCRIPTION: Tools/Options: See Photo of list.

Parts Tooling - SRS #3703

DESCRIPTION: Blocks; Tools/Options: Single Sheave 10" Block - Good Condition (2) McKissick 20 Ton Blocks - Good Shape. Condition:

Parts Tooling - SRS #3668

DESCRIPTION: Weldco Beals; Model: 1015R Casing Hammer; Tools/Options: Weldco Beals 1015R Rebuilt Casing Hammer. Air Operated. All Plates to fit a Reichdrill T-690

Parts Tooling - SRS #3625

DESCRIPTION: Tools/Options: Assorted Drilling Equipment: 58' Gefco Failing Mast with Attached Crown Block, 11' Gefco Failing Substructure with Leveling Pads, 20-1/2" Oilwell Rotary Table, Gefco Failing 325HP Drawworks, (1) Set of 5" Drill pipe Elevators, (1) Set of 5" Drill Pipe Tongs, (1) Set of 5" Slips, (1) Set of Collar Slips, (1) Dog Collar, Assorted used Bits, (5) Lengths of 5" X 30' Drill Pipe with 4.5" IF Threads, (1) Mud Basket.

Parts Tooling - SRS #3605

DESCRIPTION: Foremost; Model: 1500 Series; Tools/Options: Foremost 1500 Series Pipe Handling Systems for Reverse Circulation Drilling. Mounts to the side of the Mast to Load and Unload Drill Pipe while Drilling at an Angle. Jaw Range: 2-7/8" - 8-5/8", Capable of Handling Pipe up to Range II, 1,500# Lift Capacity, 12,000 ft.-lbs. of Breakout Torque capacity. Estimated Weight is 3,500#.. Condition:

Parts Tooling - SRS #3584

DESCRIPTION: Parts & Tooling ; Tools/Options: 23" King Drill Bit. 23" Over the Hammer Sleeve for QL 120 Hammer. Barber X Beco Sub (10-3/4" OD, 6" Barber Thread). Diverter Heads/Adapters (24" X 16", 20" X 16", 18" X 16"), 8", 10". Diverters/Adapters (12", 20", 24"). Jaws: 8", 10", 16", 18", 20", 24". Call for Price. Open to Offers..

Parts Tooling - SRS #3523

DESCRIPTION: Misc. Tooling; Tools/Options: 40 Joints of 30" X 25' Fiberglass Casing 1 Joint of 30" X 10' Perf. Fiberglass Casing 1 Stainless Steel 30" X 2'' Well Screen 3 Stainless 4" Screens with Casing Thread 32 Stainless 5" Screens with Pipe Thread 6 Stainless 4" Screens with Pipe Thread 1 Stainless 3" Screen with Pipe Thread 2 2" Sand Point Screens 80 Lengths of 5" PVC Threaded Well Casing 20 Pieces of 5" Well Casings (broken ends) 36" Core Grab Bucket w/ 4" Box & Pengo Teeth 36" HD Rock Auger w/ 4" Box & Pengo Teeth 10 Pieces HAS 10" OD 7-1/2" ID X 5' (key way w/ screw bolt locks). 22 5' Pieces 8" OD 3-1/2" HAS (2) 8" Carbide Bits Threaded Bolt Locks (10) 10' X 5' X 2" AW Rod (1) 120# Drive Block Mechanical Bucket Rig Mud Pump 16 X 8' 14" X 2' Auger with 1-5/8" Hex Drive 2 Steel Loading Ramps (24" wide X 16' Long) 24" Gus Pech Dirt Bucket w/ 4" Box 36" Light Duty Auger with 1-5/8" Hex 36" HD Gus Pech Dirt Bucket w/ 4" Box Hydraulic wire Wrap Spool Machine w/ Skid Steer Attachment. Hydraulic Auger Drive w/ Skid Steer Attachment Skid Steer Tree Digger w/ Skid Steer Attachment 34 Assorted Truck Tires in 10020 Tire Sizes Sump Pump w/ Cables, pipe on a roller w/ a Hydraulic Winch 30' Flatbed Triaxle Trailer with Pintle Hitch 3" Trash Pump 8' X 10" Auger 10' X 5" Solid Auger 2,000 Gallon Round Steel Water Tank 2,000 Gallon Fiberglass Water Tank Assortment of 3-1/2" - 10" Tricone Bits new & rebuilt Water Level Sensor Unit with Caser.

Parts Tooling - SRS #3469

DESCRIPTION: Tools/Options: Misc. Cable Tool Parts & Tooling. Stems, Bailers, Elevators, Custom Built Tooling.

Parts Tooling - SRS #3467

DESCRIPTION: Tools/Options: 6" Water Pump with a Good Running Ford 300 Engine. Light Plant. 24" Welders Pipe Clamp. Various size Clamps Available. All Can be Sold Separate, Call for Price.

Parts Tooling - SRS #3426

DESCRIPTION: Wilson; Model: Senior; Tools/Options: Wilson Senior Tubing Mast. Rebuilt Top to Bottom in 2015. 11" X 9" X 54' Single Pole, 4-Head Sheave.

Parts Tooling - SRS #3332

DESCRIPTION: Tools/Options: (4) Down Hole Hammers with 6" to 8.5" Bits and some misc. Drilling Bits 6" - 16", Subs, etc.

Parts Tooling - SRS #3149

DESCRIPTION: Tools/Options: 14-3/4" Stabilizer Assembly 6-5/8" Regular PU BD with 7X2 Flats - BFF X 18'.

Parts Tooling - SRS #3148

DESCRIPTION: Tools/Options: (3) 6" X 20' Drill Collars with 4-1/2" XH Box Up Pin Down with 5X2 Flats.

Parts Tooling - SRS #3147

DESCRIPTION: Tools/Options: (2) 8" X 20' Drill Collars with 6-5/8" Regular PU BD with 7X2 Flats.

Parts Tooling - SRS #3146

DESCRIPTION: Tools/Options: 17-1/2" Stabilizer with 6-5/8" Regular PU BD with 7X2 Flats.

Parts Tooling - SRS #3145

DESCRIPTION: Tools/Options: 17-1/2" Stabilizer Assembly. 6-5/8" Regular PU BD with 7X2 Flats-BFF X 18'.

Parts Tooling - SRS #3083

DESCRIPTION: Tools/Options: 8" Smooth Stabilizer with 2-3/8" Thread.

Parts Tooling - SRS #3076

DESCRIPTION: CR 120 Hammers; Condition: Good; Tools/Options: Used CR-120 Hammers, Two available. Will Sell Separately. OD Measurements Thread End = 11.141", Mid Section = 11.190, Bit End = 11.190. The Second Hammer Measures - Thread End = 11.141, Mid Section = 11.182, Bit End = 11.142.

Parts Tooling - SRS #2990

DESCRIPTION: Tools/Options: QL 120 12" Hammers available, All have been Quality Inspected. 70% - 80%, 80% - 90%, 90% +++. Call for Pricing.

Parts Tooling - SRS #2965

DESCRIPTION: Tools/Options: IR 36-5 Cluster Drill and IR 24-3 Cluster Drill. Can be sold separately.

Parts Tooling - SRS #2964

DESCRIPTION: Tools/Options: (2) Joints 11" Flat Roller TCI Horizontal Reamers with 6-5/8" Connections.

Parts Tooling - SRS #2963

DESCRIPTION: Tools/Options: 6" Matrix Type Reverse Circulation Hammer.

Parts Tooling - SRS #2962

DESCRIPTION: Tools/Options: (4) Non-Rotating 6-5/8" API Box X Pin Stabilizers, 8" - 9" OD Body.

Parts Tooling - SRS #2955

DESCRIPTION: Condition: Reamer Bit only used One Time; Tools/Options: 18" Button Reamer Bit, Carbide Tooth. Only use One Time. Also includes a Sub Adaptor

Parts Tooling - SRS #2895

DESCRIPTION: Ingersoll Rand; Model: T4W; Tools/Options: Ingersoll Rand T4W: Complete Rebuilt Tophead Drive. No Motor.

Parts Tooling - SRS #2877

DESCRIPTION: Mounted On: Trailer; Tools/Options: Wet Splitter: Runs off of Hydraulics from Drill.

Parts Tooling - SRS #2863

DESCRIPTION: Cable Rig Tooling; Tools/Options: TOOLING: 6" Drilling Tools, including some elevators. Will sell all or individually. 4" Swab Tools & Oil Saver - Only Used One Time. Casing Strut for a Bucyrus Erie 60L Mast - Like New. Also available is an Oil & Gas Separator that was used for a Short Time - Perfect Condition. Call for Pricing.

Parts Tooling - SRS #2858

DESCRIPTION: Tools/Options: 15' - 10" Stabilizer with 13" - 13-1/2" Roller Bit.

Parts Tooling - SRS #2769

DESCRIPTION: Condition: Refurbished; Tools/Options: 4.5" Refurbished 7-Rod Carousel - Will Fit any IR Rig, (2) Stabilizers, Tophead Subs, Pick-Up Plug, Upper & Lower Wrenches, Couple of Drill Collars. Would Like to Sell as a Package.

Parts Tooling - SRS #2545

DESCRIPTION: Tools/Options: Drill Collars: (10) 3-3/4" and Bigger X 20', 2-7/8" Thread

Parts Tooling - SRS #2456

DESCRIPTION: Tools/Options: DRILL COLLARS: (6) 4-1/2" OD X 20' Collars, H90 Threads. Some are spiral. (1) 6" OD x 30' Bottom Hole Collar with 3F4R Float, 3-1/2" IF Threads on Top, 4-1/2" or 5-1/2" API Regular Threads on the Bottom, handles a 7-7/8" or larger Bit, also has (1) 6" OD X 30' Collar with matching threads (3-1/2" IF on both ends) that screws into Bottom Hole Collar

Parts Tooling - SRS #2303

DESCRIPTION: Drill Collars; Tools/Options: Drill Collars: (1) 5-7/8" X 25' w/ 4-1/2" full hole thread , (1) 5-7/8" X 23' w/ 4-1/2" full hole thread, (1) 5-3/4" X 27' w/ 3-1/2" IF thread

Parts Tooling - SRS #2268

DESCRIPTION: Tools/Options: Scorpion Wrench & Hydraulic Pump. Heavy Duty, Factory Built..

Southern Office:
1485 DeSoto Blvd N
Naples FL 34120
Phone: 239.774.1939
FAX: 239.774.6666

Northern Office:
Oil City PA 16301
Phone Toll FREE: 1.888.204.3907
Fax: 814.676.0378