SRS #3597

Year: 2012
Make: Acker
Model: Soil-XLS
Engine: Deutz Diesel 97 HP 5-Cylinder
Mounted On: CAT Rubber Tracks

Tools/Options: Acker Soil-XLS Year: 2012: Deck Engine is a 5-Cylinder 97 HP @2,000 RPM with 12 Volt. Electric Start & Hydrostatically Operated Engine Leveler, Feed Mechanism Consists of Double Acting Chain Drive Mechanism Connected to a Hydraulic Cylinder with a 72" Stroke & Capable of 11,000# Upward Thrust, 11,000# of Pulldown. Feed Speeds are 0-72 FPM Up and Down. Drill Drive Taken from Prime Mover Through a Variable Volume Over Center Piston. Pump and Tandem Fixed Volume Pump. 8-Speed Hydraulic Drill Head with 3-5/8" Open Spindle, RPM is Infinitely Controlled in each Gear Range. The Transmission is a 4-Speed with a 2-Speed Hydraulic Motor Making (8) Speeds, The working Torque is 5,000ft.-lbs. with a maximum Speed of 1,000 PM, also Includes Drill Head Gear Oil Recirculation System with a Screw on Filter. Mast is of Welded Structural Steel Construction & Supports and Guides the Rotation & Feed Components, Positioned with Two Hydraulic Cylinders and Rigidly Held in the Vertical Position for Drilling and is Lowered to the Travel Position for Moving from Hole to Hole and Includes Mast Extension to allow for 10' Rod Pulls. Mast Mounting allows for Angle Drilling up to 45 as well as 90 Vertical, also Includes Mast Dump to 60" and Crown Block with Sheaves. Slide Head Movement is 12", Auger Guide, Hydraulic Leveling Jacks, Two Front and Two Rear with 36" Stroke and Lock check Valves. The Entire Drill is Mounted on a Structural Steel Frame and is Self Propelled, 18" Tracks, Independent and Reversible. Hydraulic Motor Drive as well as Full Function Remote Radio Control Operations with an Emergency Shutdown. 4.17 Ground Bearing Pressure. Carrier Speed is 3.27 MPH, 13" Clearance. Includes Fold up Operators Step, Low Clearance with Mast Extension for 15' Pipe. Hydraulic Powered Cargo Type Hoist, 8,500# Planetary Main Drum Hoist, with 75' of 5/16" Cable. Hydraulically Powered Wireline Hoist for Core Drilling, 1,000' of 1/4" Non-Rotation Cable with a Lifting Capacity of 800# with Brake. Hydraulically Powered Front Mounted Winch with 20,000# Capacity Capable of Operating in Conjunction with Tracks. 4" Ackermatic Hydraulic Chuck Assembly, Handles HW Rods. Designed for High Production Wireline Rock Coring. Moyno 3L6. 160 Gallon Steel Water Tank and Rod Rack.

Southern Office:
1485 DeSoto Blvd N
Naples FL 34120
Phone: 239.774.1939
FAX: 239.774.6666

Northern Office:
Oil City PA 16301
Phone Toll FREE: 1.888.204.3907
FAX: 814.676.0378